修复你的物品 社区 商店

Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement

简介

For sticky cold/hold buttons, you may only need to clean the button. This guide will show you how to fully remove and replace the button.

Note: This guide requires soldering skills. If you don't know how to solder or want to brush up on your skills check out this handy tutorial.

你所需要的

  1. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement, Back Panel: 步骤 1 中的图像 1，1

    • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

    • Hold the hair dryer by the handle so that the back panel faces up.

    编辑

  2. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 2 中的图像 1，2 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 2 中的图像 2，2

    • Remove the two 15.875 mm Phillips #2 screws from the back panel.

    编辑

  3. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 3 中的图像 1，3 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 3 中的图像 2，3 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 3 中的图像 3，3

    • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

    • Continue separating the back panel, working along the seam.

    • With moderate force, completely remove the back panel from the hair dryer.

    编辑

  5. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement, Fan Motor Assembly: 步骤 4 中的图像 1，2 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement, Fan Motor Assembly: 步骤 4 中的图像 2，2

    • Hold the hair dryer by the nozzle so that the handle points to the left.

    • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

    编辑

  6. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 5 中的图像 1，3 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 5 中的图像 2，3 Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 5 中的图像 3，3

    • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

    • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

    • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

    编辑

  7. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement, Hot/Cold Button: 步骤 6 中的图像 1，1

    • Caution: Do not attempt to open or tamper with the capacitor. You may suffer severe electrical shocks.

    • Hold the electrical switches so that the wires are facing upwards.

    编辑

  8. Conair Infiniti Pro Model 259NP Hot/Cold Button Replacement: 步骤 7 中的图像 1，1

    • Focus on the middle of the three buttons.

    • Desolder the button at the circled locations.

    • To reattach the new button, resolder at the same points. Be sure the wires connect to the correct locations.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与1其他贡献者

Timothy Lo

于04/22/14注册

1,172 声望

创作了7篇指南

徽章: 14

+ 11更多徽章

团队

Cal Poly, Team 10-58, Amido Spring 2014 Cal Poly, Team 10-58, Amido Spring 2014 的会员

CPSU-AMIDO-S14S10G58

4 名成员

创作了7篇指南

2条评论

so where do you buy parts???

akatser1 - 回复

That's not a capacitor, that's an ion generator like this one https://www.goldmine-elec-products.com/p...

Shannon Carey - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 7

总计 4,484