跳转到主内容

Conair Infiniti Pro Model 259NP Cold Shot Button Replacement

你所需要的

  1. Conair Infiniti Pro Model 259NP Cold Shot Button Replacement, Back Panel: 步骤 1 中的图像 1,1
    • Caution: Unplug the hair dryer before attempting this guide. Leaving the device plugged in may result in electrocution and damage to the device.

    • Hold the hair dryer by the handle so that the back panel faces up.

  2. Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 2 中的图像 1,2 Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 2 中的图像 2,2
    • Remove the two 15.875 mm Phillips #2 screws from the back panel.

  3. Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 3 中的图像 1,3 Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 3 中的图像 2,3 Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 3 中的图像 3,3
    • Starting from where the cord attaches to the handle, pull apart the two plastic panels.

    • Continue separating the back panel, working along the seam.

    • With moderate force, completely remove the back panel from the hair dryer.

  4. Conair Infiniti Pro Model 259NP Cold Shot Button Replacement, Fan Motor Assembly: 步骤 4 中的图像 1,2 Conair Infiniti Pro Model 259NP Cold Shot Button Replacement, Fan Motor Assembly: 步骤 4 中的图像 2,2
    • Hold the hair dryer by the nozzle so that the handle points to the left.

    • Remove the two 1-inch Phillips #2 screws from the back of the fan motor.

  5. Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 5 中的图像 1,3 Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 5 中的图像 2,3 Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 5 中的图像 3,3
    • Caution: If you recently used the hair dryer, wait at least 10 minutes before attempting this step. The heating element may still be very hot and can cause serious burns.

    • Pull on the back of the fan motor to gently lift the motor out of the hair dryer.

    • Lift the attached electrical wiring and heat shield completely out of the hair dryer.

  6. Conair Infiniti Pro Model 259NP Cold Shot Button Replacement, Cold Shot Button: 步骤 6 中的图像 1,1
    • Caution: Do not attempt to open or tamper with the capacitor. You may suffer severe electrical shocks.

    • Hold the electrical switches so that the wires are facing upwards.

  7. Conair Infiniti Pro Model 259NP Cold Shot Button Replacement: 步骤 7 中的图像 1,1
    • Focus on the button closest along the wires to the fan motor.

    • Desolder the button at the circled locations.

    • To reattach the new button, resolder at the same points. Be sure the wires connect to the correct locations.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Timothy Lo

于04/22/14注册

1,172 声望

创作了7篇指南

团队

Cal Poly, Team 10-58, Amido Spring 2014 Cal Poly, Team 10-58, Amido Spring 2014 的会员

CPSU-AMIDO-S14S10G58

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 5

过去 30 天: 12

总计 1,753