跳转到主内容

修复你的物品

维修的权力

商店

简介

This guide will build off of the Housing and Power Cord Removal guides to remove and replace the motherboard.

  1. Remove the Philips #1 28 mm.
    • Remove the Philips #1 28 mm.

    • Make sure device is unplugged and cool before attempting to replace parts.

  2. Remove the Philips #1 22 mm screws.
    • Remove the Philips #1 22 mm screws.

  3. Pry off the housing using a plastic spudger. Pry off the housing using a plastic spudger. Pry off the housing using a plastic spudger.
    • Pry off the housing using a plastic spudger.

  4. Pull power chord out.
    • Pull power chord out.

  5. Heat up your soldering gun and desolder the red wire from the motherboard as shown.
    • Heat up your soldering gun and desolder the red wire from the motherboard as shown.

    • Note the location of wire attachment.

  6. With your soldering gun, desolder the white wire from the motherboard as shown.
    • With your soldering gun, desolder the white wire from the motherboard as shown.

    • Note the location of wire attachment.

  7. Once both wires are desoldered the motherboard can be removed.
    • Once both wires are desoldered the motherboard can be removed.

结论

To reassemble your device, follow these instructions in reverse order, making sure to resolder the wires correctly into the replacement motherboard.

另外一个人完成了本指南。

Jonathon Bruer

于2017年11月09日注册

580 信誉积分

创作了5篇指南

团队

IUPUI, Team S7-G5, Baechle Fall 2017 IUPUI, Team S7-G5, Baechle Fall 2017 的会员

IUPUI-BAECHLE-F17S7G5

3 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 259