跳转到主内容

Coby DVD209 The bottom portion of the DVD player Replacement

你所需要的

  1. Coby DVD209 The bottom portion of the DVD player Replacement, The bottom portion of the DVD player: 步骤 1 中的图像 1,3 Coby DVD209 The bottom portion of the DVD player Replacement, The bottom portion of the DVD player: 步骤 1 中的图像 2,3 Coby DVD209 The bottom portion of the DVD player Replacement, The bottom portion of the DVD player: 步骤 1 中的图像 3,3
    • Press the eject button to view the laser inside.

    • Using the blue plastic tool and the tweezers, remove the ribbon cable.

  2. Coby DVD209 The bottom portion of the DVD player Replacement: 步骤 2 中的图像 1,3 Coby DVD209 The bottom portion of the DVD player Replacement: 步骤 2 中的图像 2,3 Coby DVD209 The bottom portion of the DVD player Replacement: 步骤 2 中的图像 3,3
    • Remove the six 1cm screws on the bottom of the device with the Phillips #1 screwdriver.

    • Do not lift the top of the DVD player too quickly because there are wires attached on the inside.

    • Pry the top of the device open from the right side where the buttons are located.

  3. Coby DVD209 The bottom portion of the DVD player Replacement: 步骤 3 中的图像 1,3 Coby DVD209 The bottom portion of the DVD player Replacement: 步骤 3 中的图像 2,3 Coby DVD209 The bottom portion of the DVD player Replacement: 步骤 3 中的图像 3,3
    • When pulling the ribbon cables out, make sure not to pull by the wires, as this can cause damage to them.

    • Pinch the plastic adapter with two fingers to remove the wires circled in red from the circuit board.

结论

To reassemble your device, follow these instructions in reverse order.

Kyle VanAllen

于01/20/12注册

70 声望

创作了2篇指南

团队

Cal Poly, Team 10-36, Amido Winter 2012 Cal Poly, Team 10-36, Amido Winter 2012 的会员

CPSU-AMIDO-W12S10G36

4 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 311