修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Cleaning 1985-1988 Volvo 740 Throttle Body

简介

This manual provides instructions on how to clean the tube and butterfly valve of the throttle body as well as clean and protect the electrical contacts

你所需要的

  1. Cleaning 1985-1988 Volvo 740 Throttle Body, 1985-1988 Volvo 740 Preparing Car For Work: 步骤 1 中的图像 1，2 Cleaning 1985-1988 Volvo 740 Throttle Body, 1985-1988 Volvo 740 Preparing Car For Work: 步骤 1 中的图像 2，2

    • Firstly Disconnect battery

    • Always take the negative terminal off first.

    • '''General Tip After disconnecting the battery leave the car for about 10 mins , This lets any residual energy left in the electrical system to dissapate. It is good practise whatever the job

    翻译

  2. Cleaning 1985-1988 Volvo 740 Throttle Body, Removing Throttle Body: 步骤 2 中的图像 1，1

    • Locate throttle body on right side of engine, it is between the intake tube and intake manifold.

    翻译

  3. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 3 中的图像 1，1

    • Locate throttle linkage cable assembly.

    翻译

  4. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 4 中的图像 1，2 Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 4 中的图像 2，2

    • Twist the assembly clockwise.

    翻译

  5. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 5 中的图像 1，1

    • Slide both slackened cables off assembly’s guides.

    翻译

  6. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 6 中的图像 1，2 Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 6 中的图像 2，2

    • Locate the two hoses on the top of the throttle body.

    • Gently lift the hoses off.

    翻译

  8. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 7 中的图像 1，1

    • Use a flat head screwdriver to loosen the hose clamp attaching the intake tube to the throttle body.

    翻译

  9. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 8 中的图像 1，1

    • Remove the intake tube from the throttle body.

    翻译

  10. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 9 中的图像 1，1

    • Locate wiring clip on the underside of the throttle body.

    翻译

  11. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 10 中的图像 1，2 Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 10 中的图像 2，2

    • Press down on the locking mechanism before gently removing the wiring clip.

    翻译

  12. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 11 中的图像 1，3 Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 11 中的图像 2，3 Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 11 中的图像 3，3

    • Locate throttle linkage arm.

    • Open the locking clip with a flat head screwdriver.

    • Pry off the linkage arm with a flat head screwdriver.

    翻译

  13. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 12 中的图像 1，3 Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 12 中的图像 2，3 Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 12 中的图像 3，3

    • Locate the three 13mm nuts attaching the throttle body to the intake manifold.

    • Remove nuts with a 13mm crescent wrench.

    翻译

  14. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 13 中的图像 1，1

    • Lift the throttle body off of the intake manifold.

    • The manifold is now out of the engine bay and ready for cleaning or adjustment.

    翻译

  15. Cleaning 1985-1988 Volvo 740 Throttle Body, Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 14 中的图像 1，2 Cleaning 1985-1988 Volvo 740 Throttle Body, Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 14 中的图像 2，2

    • Cover the electrical contacts with a shop towel to prevent throttle body cleaner from inadvertently spilling over.

    翻译

  16. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 15 中的图像 1，1

    • Liberally apply throttle body cleaner to the inside of throttle body and butterfly valve.

    • Use a shop towel sprayed with cleaner to wipe off thick grime if severely dirtied.

    翻译

  17. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 16 中的图像 1，2 Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 16 中的图像 2，2

    • Spray electrical cleaner on the metal contacts to blast away particles in the bracket.

    • Spray off the wiring clip that attaches to the throttle body inside the engine bay.

    翻译

  18. Cleaning 1985-1988 Volvo 740 Throttle Body: 步骤 17 中的图像 1，1

    • Apply a small amount of dielectric grease to the metal contacts to prevent corrosion.

    翻译
结论

To reinstall the throttle body after cleaning follow reverse directions for prerequisite guide #2

另外一个人完成了本指南。

作者

与5其他贡献者

Raymond

于10/11/10注册

76 声望

创作了2篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 3-28, Regan Fall 2010 Cal Poly, Team 3-28, Regan Fall 2010 的会员

CPSU-REGAN-F10S3G28

4 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 15

总计 7,996