修复你的物品 社区 商店

Circuit Board Housing Removal

简介

Use this guide in order to remove the housing of the phone.

你所需要的

  1. Circuit Board Housing Removal, Battery: 步骤 1 中的图像 1，2 Circuit Board Housing Removal, Battery: 步骤 1 中的图像 2，2

    • Locate the horizontal grip located on the back cover of the phone.

    • Slide the back cover down and off of the phone.

    编辑

  2. Circuit Board Housing Removal: 步骤 2 中的图像 1，2 Circuit Board Housing Removal: 步骤 2 中的图像 2，2

    • Insert a plastic opening tool into the battery release point located above the battery.

    • Pull outwards in order to release the battery.

    编辑

  4. Circuit Board Housing Removal, Circuit Board Housing: 步骤 3 中的图像 1，3 Circuit Board Housing Removal, Circuit Board Housing: 步骤 3 中的图像 2，3 Circuit Board Housing Removal, Circuit Board Housing: 步骤 3 中的图像 3，3

    • Locate the 5 screws holding the body of the phone together.

    • The top screw will have a plastic cover, remove it using tweezers.

    • Using a Philips head screwdriver, twist counterclockwise to remove the screws.

    • Take special care with the screw located at the top of the phone. It is smaller and more likely to be damaged or improperly attached.

    编辑

  5. Circuit Board Housing Removal: 步骤 4 中的图像 1，2 Circuit Board Housing Removal: 步骤 4 中的图像 2，2

    • Lift the back cover starting at the bottom of the phone.

    编辑

  6. Circuit Board Housing Removal: 步骤 5 中的图像 1，2 Circuit Board Housing Removal: 步骤 5 中的图像 2，2

    • Remove the back cover completely from the phone.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Jonathan Flowers

于10/18/13注册

607 声望

创作了6篇指南

徽章: 8

+ 5更多徽章

团队

Clemson, Team 14-7, Benson Fall 2013 Clemson, Team 14-7, Benson Fall 2013 的会员

CLEM-BENSON-F13S14G7

3 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 3

总计 600