你所需要的
-
-
-
unscrew one fastener and disconnect any hoses to the engine.
-
two additional 'push-on' connecting points on the underside.
-
disconnect the baffles to the intake manifold(optional but makes much needed room)
-
Remove sensor on the baffles which can be pulled off by first sliding a red tab on the electrical connection.
-
-
-
Unscrew the white knob on the driver side bottom of the radiator.
-
Remove fill cap to allow for quicker drain
-
-
-
Some people will remove the engine fan to allow for more working space.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
3等其他人完成本指南。
