简介

Power buttons notoriously end up inside of devices if too much force is applied. This guide aims to replace the power button into it's desired location.

配件

无需配件。

  1. Place the Google Chromecast face down (with text not showing) on a flat surface.
    • Place the Google Chromecast face down (with text not showing) on a flat surface.

    • Insert a flat tool just above the micro-USB port to detach the top part of the case from the bottom.

    添加评论

  2. Continue prying the top of the case from the bottom toward the HDMI port until the top casing is completely removed.
    • Continue prying the top of the case from the bottom toward the HDMI port until the top casing is completely removed.

    添加评论

  3. 订单满 $20 免运费
    结账时使用优惠码 BLUEANDBLACK
    订单满 $20 免运费
    使用优惠码 BLUEANDBLACK
    • Remove the circuit board, lifting from the HDMI port.

    • The power button may become dislodged.

    添加评论

    • Pry the plastic clamp from the heatsink.

      • Do not pry too hard to avoid breaking the clamp.

    添加评论

    • Insert a plastic opening tool under the heatsink, and pry the heatsink up and out of the case.

      • The adhesive's strength may vary, and force should be applied gently until it becomes dislodged to avoid breaking the device.

    添加评论

    • Press the plastic button from the outside of the port, pushing it inward if it is stuck.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Cameron Heiges

于2018年03月21日注册

497 信誉积分

创作了3篇指南

团队

IUPUI, Team S5-G6, Baechle Spring 2018 IUPUI, Team S5-G6, Baechle Spring 2018 的会员

IUPUI-BAECHLE-S18S5G6

3 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 5

过去的30天: 20

总计 155