跳转到主内容

Celestron 71328 Nature DX 8x25 Control Arm Replacement

你所需要的

  1. Celestron 71328 Nature DX 8x25 Control Arm Replacement, Skin Cover: 步骤 1 中的图像 1,2 Celestron 71328 Nature DX 8x25 Control Arm Replacement, Skin Cover: 步骤 1 中的图像 2,2
    • Using a plastic opening tool, nylon spudger or metal spudger, pry into seam of the skin cover at the center of the device. Lightly lift the tool which should cause the skin cover to rise.

  2. Celestron 71328 Nature DX 8x25 Control Arm Replacement: 步骤 2 中的图像 1,2 Celestron 71328 Nature DX 8x25 Control Arm Replacement: 步骤 2 中的图像 2,2
    • Start peeling the skin away from the center. Apply force as there is an adhesive substance that is binding the skin to the device. Continue peeling until skin cover slides off completely.

  3. Celestron 71328 Nature DX 8x25 Control Arm Replacement: 步骤 3 中的图像 1,1
    • Repeat steps 1 and 2 for the other side.

  4. Celestron 71328 Nature DX 8x25 Control Arm Replacement, Control Arm: 步骤 4 中的图像 1,2 Celestron 71328 Nature DX 8x25 Control Arm Replacement, Control Arm: 步骤 4 中的图像 2,2
    • Locate the panels in front of the binoculars between the middle axle and the viewing lens and simply pry them off with your fingers

  5. Celestron 71328 Nature DX 8x25 Control Arm Replacement: 步骤 5 中的图像 1,2 Celestron 71328 Nature DX 8x25 Control Arm Replacement: 步骤 5 中的图像 2,2
    • Using a flathead screwdriver, unscrew the highlighted screwhead for the control arm.

    • With your fingers, grab the screw head and pull it out completely once it's unscrewed and replace it with the new control arm if needed.

    • Parts revealed will be heavily lubricated. Consider wearing gloves.

结论

To reassemble your device, follow these instructions in reverse order.

Bryce Colangelo

于02/15/17注册

525 声望

创作了5篇指南

团队

USF Tampa, Team S6-G6, Lacy Spring 2017 USF Tampa, Team S6-G6, Lacy Spring 2017 的会员

USFT-LACY-S17S6G6

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 6

总计 270