简介

Replacing the internal frame on this device is very simple and requires minimal disassembly.

  1. Lay the device on its back, and rotate so the base is facing away from you.
    • Lay the device on its back, and rotate so the base is facing away from you.

  2. Grip the frame with your fingers under the edge of the frame, and thumbs pushing down on the front of the device.
    • Grip the frame with your fingers under the edge of the frame, and thumbs pushing down on the front of the device.

  3. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店
  4. Lift up the frame with your fingers and push down the rest of the device with your thumbs.
    • Lift up the frame with your fingers and push down the rest of the device with your thumbs.

  5. Remove the frame and matte from the device.
    • Remove the frame and matte from the device.

  6. Remove the four 7mm Torx T6 screws.
    • Remove the four 7mm Torx T6 screws.

  7. Using the plastic opening tool or your fingers, lift up the frame from any edge. Remove the frame from the device.
    • Using the plastic opening tool or your fingers, lift up the frame from any edge.

    • Remove the frame from the device.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Casey Glasgow

于2014年01月26日注册

510 信誉积分

创作了5篇指南

团队

Cal Poly, Team 9-25, Maness Winter 2014 Cal Poly, Team 9-25, Maness Winter 2014 的会员

CPSU-MANESS-W14S9G25

4 名成员

创作了5篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 58