简介

Is your G-Shock telling you the battery is low? This guide will demonstrate how to replace the battery for a Casio G-Shock GD-350 watch. This particular watch has a negative display, but the steps are the same whether your watch has a positive or negative display.

The steps for this guide should be a straightforward process without needing any special skills. Many of the basic tools for this guide may already be at your disposal, and if not, they're accessible to acquire. Latex or nitrile gloves should be used. Gloves are recommended for this guide to protect any of the components from the watch being shorted or damaged.

你所需要的

步骤 1 Battery

Casio G-Shock GD-350 Battery Replacement, Battery: 步骤 1 中的图像 1，2

Casio G-Shock GD-350 Battery Replacement, Battery: 步骤 1 中的图像 2，2

Flip your watch over so the bottom is facing up.

编辑

步骤 2

Casio G-Shock GD-350 Battery Replacement: 步骤 2 中的图像 3，3

Use a small Phillips screwdriver to remove four screws from the caseback, and place the caseback and screws to the side for later.

编辑

步骤 3

Casio G-Shock GD-350 Battery Replacement: 步骤 3 中的图像 3，3

Use tweezers to remove the black gasket surrounding the rubber cover.

编辑

步骤 4

Casio G-Shock GD-350 Battery Replacement: 步骤 4 中的图像 3，3

Use tweezers to lift the metal tab and remove the rubber cover from the watch and place it to the side.

编辑

步骤 5

Casio G-Shock GD-350 Battery Replacement: 步骤 5 中的图像 3，3

From the prong side, peel the sticker halfway or just enough to create an opening for the next step.

编辑

步骤 6

Casio G-Shock GD-350 Battery Replacement: 步骤 6 中的图像 3，3

Place the pointed end of a spudger into the notch or gap of the silver latch that secures the battery, and gently pull the latch up.
Be careful when pulling the latch out to avoid damaging any internal components.

编辑

步骤 7

After lifting the latch, remove the battery with tweezers.
If the battery clamp that the latch is connected to does not open enough to remove the battery, peel back the sticker further to make room for the clamp to open.

编辑

步骤 8

Casio G-Shock GD-350 Battery Replacement: 步骤 8 中的图像 3，3

Use your hand to place the new battery underneath the clamp.
Close the clamp after installing the new battery.
If the latch doesn’t stay down when the clamp is closed, it may be bent. Straighten the latch by bending it back into its proper position so it will stay closed.

编辑

步骤 9

Casio G-Shock GD-350 Battery Replacement: 步骤 9 中的图像 3，3

Find the AC sign and the arrow that points to a hole, then look for a (-) sign.
Stick one end of the tweezers on the hole where the AC sign points to, then another end of the tweezers on the circle next to the (-) sign, and hold it for 2 seconds.
If the tweezers are not pointy enough to stick into the AC hole, bending a paperclip into an arch will do the job.