Case Opening Procedure

简介

This is a prerequisite-only guide! This guide is part of another procedure and is not meant to be used alone.

你所需要的

步骤 1 Flip over the PS4

Case Opening Procedure, Flip over the PS4: 步骤 1 中的图像 1，1

Flip the PS4 upside-down with the back side facing towards you.

翻译

步骤 2 Remove the warranty stickers

Case Opening Procedure, Remove the warranty stickers: 步骤 2 中的图像 1，3

Case Opening Procedure, Remove the warranty stickers: 步骤 2 中的图像 2，3

Case Opening Procedure, Remove the warranty stickers: 步骤 2 中的图像 3，3

Use tweezers to remove the two stickers in the center of the back of the PS4 exposing two case screws.

翻译

步骤 3 Remove the plastic screw covers

Case Opening Procedure, Remove the plastic screw covers: 步骤 3 中的图像 1，2

Case Opening Procedure, Remove the plastic screw covers: 步骤 3 中的图像 2，2

Use tweezers to carefully remove the plastic screw covers in each corner, exposing two more case screws.

翻译

步骤 4 Remove the rear case screws

Case Opening Procedure, Remove the rear case screws: 步骤 4 中的图像 1，2

Case Opening Procedure, Remove the rear case screws: 步骤 4 中的图像 2，2

Remove the four 7.2 mm Torx security screws on the back of the PS4.

翻译

步骤 5 Remove the lower case

Case Opening Procedure, Remove the lower case: 步骤 5 中的图像 1，2

Case Opening Procedure, Remove the lower case: 步骤 5 中的图像 2，2

Use your thumbs to lift the lower case up and off the PS4.
The lower case is held into place by plastic clips. You may need to use significant force to release the lower case.

翻译

步骤 6

Use a pair of tweezers to pull the power supply cable straight out and disconnect the power supply unit from the motherboard.

翻译

结论

To reassemble your device, follow the above steps in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Check out our Answers community for troubleshooting help.

Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.