跳转到主内容

Fix Your Stuff

Right to Repair

Parts & Tools

简介

The quadrocopter will not fly correctly if a rotor blade is damaged or installed wrong. This guide will show you how to remove any of the quadrocopter’s four rotor blades.

配件

没有特定配件。

  1. Using the JIS #00 screwdriver, hold the  rotor blade still and unscrew the 4.762mm screw in the center of the blade.
    • Using the JIS #00 screwdriver, hold the rotor blade still and unscrew the 4.762mm screw in the center of the blade.

  2. Lift the screw out and set it aside.
    • Lift the screw out and set it aside.

    • Lift the rotor blade out.

    • Be sure to place the rotor blades properly for stable flight. With the quadrocopter facing you, the front rotor blades should be red with blade A on the right and B on the left. The rear rotor blades should be blue with blade B on the right and A on the left.

结论

To reassemble your device, follow these instructions in reverse order.

Marissa Espino

于2017年10月23日注册

101 信誉积分

撰写一个指南

团队

UW Tacoma, Team S1-G6, Rose Fall 2017 UW Tacoma, Team S1-G6, Rose Fall 2017 的会员

UWT-ROSE-F17S1G6

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 6

过去的30天: 62

总计 757