简介
This step action guide demonstrates how to capture the jaw speed on the Runi Densifier.
你所需要的
视频概述
-
-
Remove the bolts securing the guard to the machine. Set aside.
-
Place an extended tape measure on top of the block.
-
-
-
On the Home screen, click the Red Arrow in the bottom left corner. (pictured)
-
On the next screen, click OTHER SETTINGS in the bottom right corner.
-
On the Other Settings screen, click the unlock button located on the bottom of the screen.
-
On the next screen, enter the Name (MANAGER) and Password (7452), then click the Home icon to return to the Home screen. (pictured)
-
IMPORTANT: Password should not be shared or written on machine.
-
On the Home screen, click the Red Arrow in the bottom left corner.
-
On the next screen, click the JAWS button.
-
On the next screen, click the MAN button. (picutred)
-
-
-
-
In Manual (MAN) operation, the up/down arrows are used to operate the jaws.
-
Press the up arrow for 10 seconds using a stopwatch or another timekeeping application.
-
After 10 seconds, make note of how much the jaw has traveled using the tape measure.
-
-
-
Return guard to machine and secure with the bolts.
-
On the JAWS screen, click AUT.
-
Screen will automatically refresh.
-
On the next screen, click the red arrow in the bottom left corner to return to the Home screen.
-
On the Home screen, click START AUTO to start the densifier.
-
The Jaw Speed should be recorded to the service notes.
The Jaw Speed should be recorded to the service notes.
2等其他人完成本指南。
附加文件
团队
