修复你的物品 社区 商店

Canon Selphy CP910 Printer Body Replacement

简介

The Canon Selphy CP910 is used to print pictures from a camera and WiFi connection. If there are any issues with the body of the printer, it may be necessary to remove it. For information regarding troubleshooting issues with the Canon Selphy CP910, go to Canon Selphy CP910 Troubleshooting.

Contact the manufacturer for inquiries about receiving parts of the Canon Selphy CP910.

你所需要的

  1. Canon Selphy CP910 Printer Body Replacement, Disassembling Canon Selphy CP910 Body: 步骤 1 中的图像 1，2 Canon Selphy CP910 Printer Body Replacement, Disassembling Canon Selphy CP910 Body: 步骤 1 中的图像 2，2

    • Turn the printer over.

    • Use the PH1 screw bit to remove the three 8 mm screws in the middle of the back plate.

    • Keep track of these screws because you will need them to reassemble the printer.

    编辑

  2. Canon Selphy CP910 Printer Body Replacement: 步骤 2 中的图像 1，3 Canon Selphy CP910 Printer Body Replacement: 步骤 2 中的图像 2，3 Canon Selphy CP910 Printer Body Replacement: 步骤 2 中的图像 3，3

    • Loosen up the four 10 mm corner screws.

    • A screwdriver with a long shaft approximately 7mm in diameter will make it easier to reach these screws.

    编辑

  3. Canon Selphy CP910 Printer Body Replacement: 步骤 3 中的图像 1，3 Canon Selphy CP910 Printer Body Replacement: 步骤 3 中的图像 2，3 Canon Selphy CP910 Printer Body Replacement: 步骤 3 中的图像 3，3

    • Turn the device around and remove the "open" lid.

    • This lid needs to be removed in order to take the printer apart.

    • Gently bend the lid and remove it from its hinges.

    编辑

  4. Canon Selphy CP910 Printer Body Replacement: 步骤 4 中的图像 1，3 Canon Selphy CP910 Printer Body Replacement: 步骤 4 中的图像 2，3 Canon Selphy CP910 Printer Body Replacement: 步骤 4 中的图像 3，3

    • Turn the device back over and lift the top panel up.

    • Disconnect the ribbon cables leading to the LCD screen.

    • Pull the top panel off.

    编辑

  6. Canon Selphy CP910 Printer Body Replacement, Printer Body: 步骤 5 中的图像 1，2 Canon Selphy CP910 Printer Body Replacement, Printer Body: 步骤 5 中的图像 2，2

    • Use the PH1 screw driver to remove the three screws on the motherboard.

    编辑

  7. Canon Selphy CP910 Printer Body Replacement: 步骤 6 中的图像 1，2 Canon Selphy CP910 Printer Body Replacement: 步骤 6 中的图像 2，2

    • Remove the printer.

    • This will prevent the printer from falling out during repair.

    编辑

  8. Canon Selphy CP910 Printer Body Replacement: 步骤 7 中的图像 1，3 Canon Selphy CP910 Printer Body Replacement: 步骤 7 中的图像 2，3 Canon Selphy CP910 Printer Body Replacement: 步骤 7 中的图像 3，3

    • Remove the output connections.

    • Be careful! Do not pull too hard because the wires might rip.

    • Output connections are located on the corners of the motherboard.

    编辑

  9. Canon Selphy CP910 Printer Body Replacement: 步骤 8 中的图像 1，2 Canon Selphy CP910 Printer Body Replacement: 步骤 8 中的图像 2，2

    • The motherboard is attached to three more ribbon wires.

    • Detach these wires.

    • Be careful not to pull too hard.

    编辑

  10. Canon Selphy CP910 Printer Body Replacement: 步骤 9 中的图像 1，2 Canon Selphy CP910 Printer Body Replacement: 步骤 9 中的图像 2，2

    • Separate the motherboard from the main hard drive.

    编辑

  11. Canon Selphy CP910 Printer Body Replacement: 步骤 10 中的图像 1，3 Canon Selphy CP910 Printer Body Replacement: 步骤 10 中的图像 2，3 Canon Selphy CP910 Printer Body Replacement: 步骤 10 中的图像 3，3

    • Remove the main hard drive from the printer body.

    编辑

  12. Canon Selphy CP910 Printer Body Replacement: 步骤 11 中的图像 1，2 Canon Selphy CP910 Printer Body Replacement: 步骤 11 中的图像 2，2

    • Gently remove the fan from the body.

    • The fan is glued to the case. When you install it in the new body, use hot glue to secure it in place.

    编辑

  13. Canon Selphy CP910 Printer Body Replacement: 步骤 12 中的图像 1，2 Canon Selphy CP910 Printer Body Replacement: 步骤 12 中的图像 2，2

    • The empty case will look like this once all the parts are removed.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与6其他贡献者

Christie Peralta

于02/01/16注册

700 声望

创作了5篇指南

徽章: 15

+ 12更多徽章

团队

UW Tacoma, Team 1-6, Rose Winter 2016 UW Tacoma, Team 1-6, Rose Winter 2016 的会员

UWT-ROSE-W16S1G6

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 12

过去 30 天： 55

总计 4,229