修复你的物品 社区 商店

Canon Powershot SX30 IS Back Camera Housing Replacement

简介

Quick guide on removing and replacing the plastic back cover. Replacement is required if the functions buttons fail to work, or the casing has been damaged.

你所需要的

  1. Canon Powershot SX30 IS Back Camera Housing Replacement, Back Camera Housing: 步骤 1 中的图像 1，2 Canon Powershot SX30 IS Back Camera Housing Replacement, Back Camera Housing: 步骤 1 中的图像 2，2

    • Position the camera so that the right side is visible as shown.

    • Unscrew the two 6 mm screws shown using a screwdriver.

    编辑

  2. Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 2 中的图像 1，3 Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 2 中的图像 2，3 Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 2 中的图像 3，3

    • Remove the plastic flap by pressing down on the center of the hinge and pulling on the flap with the spudger.

    • Then, unscrew the lone 6mm screw that was under the plastic flap.

    编辑

  3. Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 3 中的图像 1，2 Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 3 中的图像 2，2

    • Turn the camera so that the bottom is visible, as shown.

    • Unscrew the three 4mm screws shown red using a screwdriver.

    • Unscrew the single 6mm screw.

    • Do not touch the screw shown yellow, removal is unnecessary. (Note: the top right yellow screw should be removed)

    编辑

  5. Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 4 中的图像 1，1

    • Turn the camera so the back side is visible, as shown.

    • Unscrew the two 6mm screws.

    编辑

  6. Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 5 中的图像 1，1

    • Gently remove the back cover using the spudger.

    • Exercise caution, as the wire inside is fragile.

    编辑

  7. Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 6 中的图像 1，2 Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 6 中的图像 2，2

    • Detach the wire by lifting the small black bar that holds it to the main body of the camera.

    编辑

  8. Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 7 中的图像 1，1

    • Attach the new cover onto the camera.

    编辑

  9. Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 8 中的图像 1，1

    • Reattach the wire to your new rear casing.

    编辑

  10. Canon Powershot SX30 IS Back Camera Housing Replacement: 步骤 9 中的图像 1，1

    • Close the back cover, and re-insert appropriate screws.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与10其他贡献者

Ellis DeVoe

于04/14/15注册

580 声望

创作了5篇指南

徽章: 9

+ 6更多徽章

团队

Cal Poly, Team 5-12, Maness Spring 2015 Cal Poly, Team 5-12, Maness Spring 2015 的会员

CPSU-MANESS-S15S5G12

4 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 3

过去 30 天： 12

总计 1,326