我的工作台

快速访问设备的指南、配件和论坛

加入世界上最大的维修社区

配件

指南问题解答论坛

Canon Powershot SD880 LCD Display Replacement

Canon Powershot SD880 LCD Display Replacement

Ben Tupas 和 8 其他贡献者

最后更新于 December 21, 2022

5分钟

简单

动态照片拍摄

缺少的步骤

简介

The LCD display can be removed and replaced if it is cracked or broken.

你所需要的

工具

Phillips #0 Screwdriver

步骤 1 Back Cover

Canon Powershot SD880 LCD Display Replacement, Back Cover: 步骤 1 中的图像 1，3

Canon Powershot SD880 LCD Display Replacement, Back Cover: 步骤 1 中的图像 2，3

Canon Powershot SD880 LCD Display Replacement, Back Cover: 步骤 1 中的图像 3，3

Remove the two 2.4 mm screws on the side of the camera that are next to the LCD screen using a Phillips #00 screwdriver.
Remove the two 4.1 mm screws on the other side using a Phillips #00 screwdriver.
One screw will be located under the rubber USB flap.
Remove the single 2.6 mm screw from the bottom of the camera using a Phillips #00 screwdriver.
Slowly pull the back cover off of the camera.

步骤 2 LCD Display

Canon Powershot SD880 LCD Display Replacement, LCD Display: 步骤 2 中的图像 1，3

Canon Powershot SD880 LCD Display Replacement, LCD Display: 步骤 2 中的图像 2，3

Canon Powershot SD880 LCD Display Replacement, LCD Display: 步骤 2 中的图像 3，3

Remove the two 2.9 mm screws at the top-right corner and bottom-left corner of the LCD screen using a Phillips #0 screwdriver.
Disconnect the ribbons that connect the screen to the camera.
Lift the screen off.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与8其他贡献者

Ben Tupas

于01/13/11注册

329 声望

创作了3篇指南

+ 7更多徽章

团队

Cal Poly, Team 13-3, Forte Winter 2011 Cal Poly, Team 13-3, Forte Winter 2011 的会员

CPSU-FORTE-W11S13G3

5 名成员

创作了8篇指南

1指南评论

Hm. "Disconnect the ribbons" resulted in a torn ribbon, and so a dead camera, I think. This also doesn't say how to take the LCD screen out of its frame. Alas.

Maelduin - 2013年8月8日回复

浏览统计数据:

过去 24 小时： 0

过去 7 天： 2

过去 30 天： 30

总计 2,402