跳转到主内容

Canon Powershot S110 Option Dial Replacement

你所需要的

  1. Canon Powershot S110 Option Dial Replacement, Option Dial: 步骤 1 中的图像 1,2 Canon Powershot S110 Option Dial Replacement, Option Dial: 步骤 1 中的图像 2,2
    • Remove the battery by sliding open the battery cover on the bottom of the camera.

    • The battery must be removed to avoid shorting out any part of the camera.

  2. Canon Powershot S110 Option Dial Replacement: 步骤 2 中的图像 1,3 Canon Powershot S110 Option Dial Replacement: 步骤 2 中的图像 2,3 Canon Powershot S110 Option Dial Replacement: 步骤 2 中的图像 3,3
    • Remove the six screws by using a small Phillips head screwdriver.

    • Remove the two screws on the side of the camera on either side of the HDMI input panel.

    • Remove the two screws on the opposite side of the camera.

    • Remove the two screws on the bottom of the camera located on either side of the tripod mounting hole.

  3. Canon Powershot S110 Option Dial Replacement: 步骤 3 中的图像 1,1
    • Using an opening tool, carefully remove the outermost cover of the camera from its holders around the edges.

    • Once all of the clips around the plastic cover are released, the cover will lift off.

  4. Canon Powershot S110 Option Dial Replacement: 步骤 4 中的图像 1,2 Canon Powershot S110 Option Dial Replacement: 步骤 4 中的图像 2,2
    • Remove the two screws holding the top plastic bracket in place by using a Phillips head screwdriver.

    • Remove the screw holding down the lens cover.

    • Remove the screw located near the option dial next to the USB connections.

  5. Canon Powershot S110 Option Dial Replacement: 步骤 5 中的图像 1,1
    • Carefully lift the top panel of the camera by using a prying tool.

  6. Canon Powershot S110 Option Dial Replacement: 步骤 6 中的图像 1,1
    • Remove the screw at the center of the option dial by using a Phillips head screwdriver.

  7. Canon Powershot S110 Option Dial Replacement: 步骤 7 中的图像 1,2 Canon Powershot S110 Option Dial Replacement: 步骤 7 中的图像 2,2
    • Remove the underlying component that was attached to the now-removed screw by using a prying tool.

    • Remove the dial on the opposite side of the part using a prying tool.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

akac92

于07/14/15注册

298 声望

创作了2篇指南

团队

UW Tacoma, Team 1-2, Liner SU 2015 UW Tacoma, Team 1-2, Liner SU 2015 的会员

UWT-LINER-SU15S1G2

4 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 7

总计 1,092