跳转到主内容

简介

This guide will walk you through the necessary steps to remove your flash unit for replacement.

  1. Canon Powershot A95 Flash Unit Replacement, Flash Unit: 步骤 1 中的图像 1,3 Canon Powershot A95 Flash Unit Replacement, Flash Unit: 步骤 1 中的图像 2,3 Canon Powershot A95 Flash Unit Replacement, Flash Unit: 步骤 1 中的图像 3,3
    • Have a small Phillips-head screwdriver and extender, an opening tool, and a soldering iron to complete the following steps.

    • Keep the screws organized and separated as you remove them.

  2. Canon Powershot A95 Flash Unit Replacement: 步骤 2 中的图像 1,1
    • Locate the memory card slot on the far right with the screen facing toward you.

    • Remove the memory card.

  3. Canon Powershot A95 Flash Unit Replacement: 步骤 3 中的图像 1,2 Canon Powershot A95 Flash Unit Replacement: 步骤 3 中的图像 2,2
    • With the screen facing toward you, the battery slot can be found under the right side of the camera.

    • Remove all batteries and leave the slot open.

  4. Canon Powershot A95 Flash Unit Replacement: 步骤 4 中的图像 1,3 Canon Powershot A95 Flash Unit Replacement: 步骤 4 中的图像 2,3 Canon Powershot A95 Flash Unit Replacement: 步骤 4 中的图像 3,3
    • There are two screws to the right of the battery slot.

    • Take the #00 Phillips-head screwdriver and remove the two screws.

  5. Canon Powershot A95 Flash Unit Replacement: 步骤 5 中的图像 1,2 Canon Powershot A95 Flash Unit Replacement: 步骤 5 中的图像 2,2
    • Inside the battery slot, there are another 3 screws located at the very bottom of each slot.

    • To reach these screws and remove them, attach the screwdriver extender to the #00 Phillips-head screwdriver.

  6. Canon Powershot A95 Flash Unit Replacement: 步骤 6 中的图像 1,2 Canon Powershot A95 Flash Unit Replacement: 步骤 6 中的图像 2,2
    • At the base of the battery flap, there are 2 screws located next to the hinges of the opening.

    • Remove both screws.

  7. Canon Powershot A95 Flash Unit Replacement: 步骤 7 中的图像 1,2 Canon Powershot A95 Flash Unit Replacement: 步骤 7 中的图像 2,2
    • Using the pry tool, pry the top of the camera open.

    • Be sure not to apply too much force and damage the wires under the lid.

    • The top should dangle loosely from the camera and not be fully detached.

  8. Canon Powershot A95 Flash Unit Replacement: 步骤 8 中的图像 1,2 Canon Powershot A95 Flash Unit Replacement: 步骤 8 中的图像 2,2
    • Once the top is loose, locate the 2 screws near the AV outlet.

    • Remove both screws.

    • The removal of the 2 screws will allow you to remove the plastic AV covering.

    • Once the AV cover is removed, there will be 1 more screw left to remove.

  9. Canon Powershot A95 Flash Unit Replacement: 步骤 9 中的图像 1,2 Canon Powershot A95 Flash Unit Replacement: 步骤 9 中的图像 2,2
    • Using the pry tool, gently remove the front cover of the camera in order to expose the flash and the lens.

  10. Canon Powershot A95 Flash Unit Replacement: 步骤 10 中的图像 1,2 Canon Powershot A95 Flash Unit Replacement: 步骤 10 中的图像 2,2
    • Locate the black film under the flash unit and remove the screw holding it in place.

    • Once the screw is removed, gently wiggle the flash out of place without damaging any internal parts.

  11. Canon Powershot A95 Flash Unit Replacement: 步骤 11 中的图像 1,2 Canon Powershot A95 Flash Unit Replacement: 步骤 11 中的图像 2,2
    • There will be a second black film which is covering the flash wires.

    • Remove the film to reveal the wires.

  12. Canon Powershot A95 Flash Unit Replacement: 步骤 12 中的图像 1,1
    • Once the second film is removed and has revealed the flash wires, proceed to unsolder the necessary wires in order to detach the flash.

    • Take the new flash and solder it where the old one was removed.

结论

To reassemble, follow the disassemble steps in reverse order.

Amber

于2013年02月12日注册

3 声望

撰写一个指南

团队

Ohio State, Team 1-4, Buehl Spring 2013 Ohio State, Team 1-4, Buehl Spring 2013 的会员

OSU-BUEHL-S13S1G4

4 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 6

总计 644