简介

This guide will help Canon Powershot A70 owners replace the speakers, if the camera is not giving off sound.

  1. Open the battery compartment and remove the batteries.
    • Open the battery compartment and remove the batteries.

    • Remove the two screws that are deep in the battery compartment.

    添加评论

  2. Open the CF compartment and remove the top screw
    • Open the CF compartment and remove the top screw

    • The panel, that holds the shutter button and zoom, will come off.

      • Be careful! There are two small wires connecting the speaker to the body of the camera. These are very delicate so proceed with caution. Do not remove.

    添加评论

    • Unscrew the three small screws on the bottom.

    • remove the wrist strap

    添加评论

    • Remove the screw in the CF compartment.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Open the rubber Digital AV Out compartment flap.

      • Pry the battery with the IFIXIT opening tool.

      • Carefully pull out the battery with two fingers.

        • Unscrew the two screws that are now visible.

    添加评论

    • Starting from the bottom, carefully pull the casing off.

    • The casing will now pivot at the top.

      • There are three catches that hold the back casing to the body.

      • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

    添加评论

    • The interior of the camera should look like this.

    添加评论

    • Remove the two screws at the top of the battery compartment.

    添加评论

    • With your right thumb, pull back on the tab while using your left hand to pull the face of the camera away from the body.

    添加评论

    • Remove the two clearly visible screws from the control dial

    • The dial should come off easily

    添加评论

    • You should be able to see the two small wires connecting the speaker to a small green plug

      • With tweezers, carefully unplug the wires from the plug. The wire should slide straight out

    • Carefully replace the broken speaker/shutter panel with a new one

    添加评论

    • The removed panel should look like this

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Laura Greek

于2010年01月25日注册

16 信誉积分

创作了2篇指南

团队

Cal Poly, Team 14-40, Regan Winter 2010 Cal Poly, Team 14-40, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G40

5 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 2,822