跳转到主内容

简介

This guide explains the location of exterior screws and the process to remove the rear panel.

  1. Unscrew the three small screws on the bottom.
    • Unscrew the three small screws on the bottom.

    • remove the wrist strap

  2. Remove the screw in the CF compartment.
    • Remove the screw in the CF compartment.

  3. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  4. Open the rubber Digital AV Out compartment flap. Pry the battery with the IFIXIT opening tool. Carefully pull out the battery with two fingers.
    • Open the rubber Digital AV Out compartment flap.

    • Pry the battery with the IFIXIT opening tool.

    • Carefully pull out the battery with two fingers.

    • Unscrew the two screws that are now visible.

  5. Starting from the bottom, carefully pull the casing off. The casing will now pivot at the top.
    • Starting from the bottom, carefully pull the casing off.

    • The casing will now pivot at the top.

    • There are three catches that hold the back casing to the body.

    • You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

  6. The interior of the camera should look like this.
    • The interior of the camera should look like this.

结论

To reassemble your device, follow these instructions in reverse order.

Shalan Ertis

于2010年01月26日注册

62 信誉积分

创作了3篇指南

团队

Cal Poly, Team 14-40, Regan Winter 2010 Cal Poly, Team 14-40, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G40

5 名成员

创作了8篇指南

添加评论

浏览统计数据:

过去的24小时: 1

过去的7天: 1

过去的30天: 2

总计 3,021