取消

Canon Powershot A70 Rear Exterior Panel Replacement

撰写者： Shalan Ertis (和另外7个贡献者)

评论： 0
收藏 1

Canon Powershot A70 Rear Exterior Panel Replacement

难度

简单

步骤

5

所需时间

15分钟

简介

This guide explains the location of exterior screws and the process to remove the rear panel.

工具

购买这些工具

配件

没有特定配件。

步骤 1 Rear Exterior Panel

Unscrew the three small screws on the bottom.

Unscrew the three small screws on the bottom.
remove the wrist strap

步骤 2

Remove the screw in the CF compartment.

Remove the screw in the CF compartment.

步骤 3

Open the rubber Digital AV Out compartment flap.

Pry the battery with the IFIXIT opening tool.

Carefully pull out the battery with two fingers.

Open the rubber Digital AV Out compartment flap.
Pry the battery with the IFIXIT opening tool.
Carefully pull out the battery with two fingers.
Unscrew the two screws that are now visible.

步骤 4

Starting from the bottom, carefully pull the casing off.

The casing will now pivot at the top.

Starting from the bottom, carefully pull the casing off.
The casing will now pivot at the top.
There are three catches that hold the back casing to the body.
You may have to pull with some force. The rear panel will make a snapping noise when it separates from the body.

步骤 5

The interior of the camera should look like this.

The interior of the camera should look like this.

结论

To reassemble your device, follow these instructions in reverse order.

作者

与7其他贡献者

Shalan Ertis

于2010年01月26日注册

62 信誉积分

创作了3篇指南

+ 4更多徽章

团队

Cal Poly, Team 14-40, Regan Winter 2010 Cal Poly, Team 14-40, Regan Winter 2010 的会员

CPSU-REGAN-W10S14G40

5 名成员

创作了8篇指南

0条评论

添加一条评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 0

总计 3,019