修复你的物品 社区 商店

Canon PowerShot SX150 IS Prerequisite

仅作为前提条件
本指南仅用作其他指南的先决条件。不能单独食用。

简介

Prerequisite Only

你所需要的

  1. Canon PowerShot SX150 IS Prerequisite, Canon PowerShot SX150 IS Prerequisite: 步骤 1 中的图像 1，1

    • Remove the two 2mm screws above the screen using the size J000 screwdriver.

    翻译

  2. Canon PowerShot SX150 IS Prerequisite: 步骤 2 中的图像 1，2 Canon PowerShot SX150 IS Prerequisite: 步骤 2 中的图像 2，2

    • Remove the two 5mm screws from the side of the camera with the J000 head screw driver.

    • Using the same screwdriver, remove the one 5mm screw from the other side of the camera located under the A/V Out flap.

    翻译

  3. Canon PowerShot SX150 IS Prerequisite: 步骤 3 中的图像 1，1

    • Remove two 4mm screws from the bottom of the camera with the J000 head screw driver.

    翻译

  4. Canon PowerShot SX150 IS Prerequisite: 步骤 4 中的图像 1，1

    • Remove the plastic panel surrounding the back screen.

    翻译

  6. Canon PowerShot SX150 IS Prerequisite: 步骤 5 中的图像 1，3 Canon PowerShot SX150 IS Prerequisite: 步骤 5 中的图像 2，3 Canon PowerShot SX150 IS Prerequisite: 步骤 5 中的图像 3，3

    • Remove the three 3mm screws using the size J000 screw driver from the button plate.

    • Gently flip up the flex ribbon lock and remove the flex ribbon using tweezers.

    • Move the button plate out of the way.

    翻译

  7. Canon PowerShot SX150 IS Prerequisite: 步骤 6 中的图像 1，2 Canon PowerShot SX150 IS Prerequisite: 步骤 6 中的图像 2，2

    • There is a black flex ribbon lock that must be lifted and unlocked with your tweezers before this flex ribbon will detach.

    • Any small tear could ruin the flex ribbon. Be very gentle while removing it.

    • Gently lift the lock and detach the flex ribbon from the circuit board with the tweezers.

    翻译

  8. Canon PowerShot SX150 IS Prerequisite: 步骤 7 中的图像 1，1

    • Remove the two 2mm screws from the bottom of the screen with the size J000 screw driver.

    • You can then lift the screen out of place and set it aside.

    翻译

  9. Canon PowerShot SX150 IS Prerequisite: 步骤 8 中的图像 1，3 Canon PowerShot SX150 IS Prerequisite: 步骤 8 中的图像 2，3 Canon PowerShot SX150 IS Prerequisite: 步骤 8 中的图像 3，3

    • With the J000 Philips head screwdriver, remove the two 2mm screws from under the flash.

    • Using the same screwdriver, remove the two 5mm screws from the bottom. One is under the battery door.

    • With the same screwdriver, remove the 2mm screw at the top of the metal plate.

    翻译

  10. Canon PowerShot SX150 IS Prerequisite: 步骤 9 中的图像 1，2 Canon PowerShot SX150 IS Prerequisite: 步骤 9 中的图像 2，2

    • Gently detach the flex ribbon with your tweezers before removing the front plate.

    翻译

  11. Canon PowerShot SX150 IS Prerequisite: 步骤 10 中的图像 1，3 Canon PowerShot SX150 IS Prerequisite: 步骤 10 中的图像 2，3 Canon PowerShot SX150 IS Prerequisite: 步骤 10 中的图像 3，3

    • Using the J000 Philips head screwdriver, remove the four 7mm screws from the silver panel.

    • Remove the two 5mm screws.

    • Remove the one 3 mm screw.

    • Using the same screwdriver, remove the 3mm screw from the top of the camera.

    • Pull the panel off and set it aside.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 109