本指南有最近更改,您可查看未经巡查的最新版本。
简介
Disassemble the back cover in order to open the camera and access the inside components.
你所需要的
-
-
Turn the camera to the side that has the screen.
-
Unscrew the two black 3.4 mm screws with a #00 Phillips screwdriver.
-
-
-
-
Turn the camera with the lens facing down.
-
Use the blue opening tool to make lever. Insert the opening tool in the seam where the front case and the back case assemble.
-
Keep making pressure and slowly slide the opening tool through all the gap.
-
There is one point when the cover will disassemble completely.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
2等其他人完成本指南。
一条评论
It took me 2 hours to install the battery door. I dropped one screw and could not find it any more it just vanished.
I was lucky to find one just like the one I lost after a half hour search.All in all I did a pretty good good job for an
auto mechanic .Thanks very much for your help, it was very easy to follow your instructions.
Fred Czarnik