Canon PowerShot SD700 Outside Case Replacement

简介

This guide will help you remove and replace the outside case of the Canon PowerShot SD700. Follow the step-by-step instructions to remove the outside case of your Canon PowerShot SD700. You will need Phillips #00 screwdriver to complete the steps throughout the guide.

你所需要的

步骤 1 Outside Case

Canon PowerShot SD700 Outside Case Replacement, Outside Case: 步骤 1 中的图像 1，1

Turn off the camera by pressing the power button above the LCD screen.

翻译

步骤 2

Remove the two, small screws on the bottom of the camera using a Phillip's #00 screwdriver.

翻译

步骤 3

Use a Phillips #00 screwdriver to remove the two, small screws on the right side of the camera.

翻译

步骤 4

Use a Phillips #00 screwdriver to remove the screw on the left of the camera under the A/V out Digital label.

翻译

步骤 5

Use a Phillips #00 screwdriver, remove the screw on the bottom of the camera near the battery and memory card slots.
This screw will be longer than the rest of the screws.

翻译