简介
This guide is required in order to replace any of the deeper components in the camera. Any component of the camera cannot be reached unless the back cover is removed.
你所需要的
-
-
Remove the 2mm screw from the back of the camera.
-
Remove two 2mm screws from the bottom of the camera.
-
Remove two 2mm screws the left side of camera.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。
团队
University of North Texas, Team S5-G3, Thompson Fall 2018 University of North Texas, Team S5-G3, Thompson Fall 2018 的会员
UNT-THOMPSON-F18S5G3
4 名成员
创作了5篇指南
