跳转到主内容
Canon PowerShot SD1400 IS User Interface Panel Replacement

Canon PowerShot SD1400 IS User Interface Panel Replacement

Braxton Beal

Braxton Beal4 其他贡献者

最后更新于 September 18, 2019

10 - 15 分钟
简单

The buttons on the user interface panel can become broken or stuck. This guide will show how to replace the user interface panel on the Canon PowerShot SD1400 IS.

你所需要的

配件

工具

查看更多...

  1. Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: 步骤 1 中的图像 1,3 Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: 步骤 1 中的图像 2,3 Canon PowerShot SD1400 IS User Interface Panel Replacement, User Interface Panel: 步骤 1 中的图像 3,3
    • Remove the four 2.0 mm Phillips screws of the camera using the J00 bit from the 54-bit Driver Kit. There are two screws on both sides.

  2. Canon PowerShot SD1400 IS User Interface Panel Replacement: 步骤 2 中的图像 1,1
    • Remove the 4.0 mm Phillips screw located on the bottom of the camera.

  3. Canon PowerShot SD1400 IS User Interface Panel Replacement: 步骤 3 中的图像 1,1
    • Remove the front face panel of the camera by hand using firm pressure.

    • If one point of the face is stuck to the body, check if there is a screw preventing the front face from coming off.

  4. Canon PowerShot SD1400 IS User Interface Panel Replacement: 步骤 4 中的图像 1,1
    • Remove the rear panel of the camera by hand using firm pressure.

  5. Canon PowerShot SD1400 IS User Interface Panel Replacement: 步骤 5 中的图像 1,1
    • Remove the user interface panel by hand. The panel may fall out on its own, this is normal.

    • Replace the user interface panel by setting it in position.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Braxton Beal

于01/30/18注册

702 声望

创作了3篇指南

团队

Baylor, Team S1-G3, Johnson Spring 2018 Baylor, Team S1-G3, Johnson Spring 2018 的会员

BU-JOHNSON-S18S1G3

3 名成员

创作了4篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 2

过去 7 天: 3

过去 30 天: 21

总计 336