修复你的物品 社区 商店

本指南有最近更改，您可查看未经巡查的最新版本。

Canon PowerShot SD1200 IS Motherboard

简介

Use this guide to access the motherboard to reseat connections on the motherboard or to remove the motherboard for replacement.

你所需要的

  1. Canon PowerShot SD1200 IS Motherboard, Front and Rear Covers: 步骤 1 中的图像 1，1

    • Remove the battery.

    翻译

  2. Canon PowerShot SD1200 IS Motherboard: 步骤 2 中的图像 1，3 Canon PowerShot SD1200 IS Motherboard: 步骤 2 中的图像 2，3 Canon PowerShot SD1200 IS Motherboard: 步骤 2 中的图像 3，3

    • Remove the two screws from the side of the camera casing with the strap. (4mm Phillips 00)

    • Remove the two screws from the bottom of the camera. (4mm Phillips 00)

    • Remove the two screws from the right side of the camera opposite the strap. (2mm Phillips 00)

    翻译

  3. Canon PowerShot SD1200 IS Motherboard: 步骤 3 中的图像 1，2 Canon PowerShot SD1200 IS Motherboard: 步骤 3 中的图像 2，2

    • Pull off the front cover.

    • If the top of the cover sticks, use gentle downward pressure on the retention clips above the lens to release.

    • Remove the back cover.

    翻译

  5. Canon PowerShot SD1200 IS Motherboard, Motherboard: 步骤 4 中的图像 1，1

    • Remove the microphone connector by gripping it with the tool and gently, with a wiggling motion, pull it out.

    • Pull the connector straight out by the white connector. Pulling on the wires will damage them.

    翻译

  6. Canon PowerShot SD1200 IS Motherboard: 步骤 5 中的图像 1，1

    • Lift off the mechanical shutter button assembly.

    翻译

  7. Canon PowerShot SD1200 IS Motherboard: 步骤 6 中的图像 1，2 Canon PowerShot SD1200 IS Motherboard: 步骤 6 中的图像 2，2

    • Use the spudger to lift the tab on the Zero Insertion Force (ZIF) connector located at the bottom of the motherboard.

    • Be sure you are prying up on the hinged retaining flap, not the connector itself.

    • Slide out the ribbon cable.

    • Use the spudger to pry up each side of the Flat-Topped Connectors

    翻译

  8. Canon PowerShot SD1200 IS Motherboard: 步骤 7 中的图像 1，1

    • Remove the press fit ribbon cable by prying upward with spudger tool.

    • It is not necessary to remove the Lens or Flash Assemblies to remove the motherboard.

    翻译

  9. Canon PowerShot SD1200 IS Motherboard: 步骤 8 中的图像 1，1

    • Remove the bottom right screw from the motherboard. (4mm Phillips 00)

    • Remove top and lower left black screws from the motherboard. (2.5mm Phillips 00)

    翻译

  10. Canon PowerShot SD1200 IS Motherboard: 步骤 9 中的图像 1，1

    • Lift out the motherboard.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Jeff Casper

于09/15/16注册

848 声望

创作了7篇指南

徽章: 18

+ 15更多徽章

团队

USF Tampa, Team 17-5, Blackwell Fall 2016 USF Tampa, Team 17-5, Blackwell Fall 2016 的会员

USFT-BLACKWELL-F16S17G5

3 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 14

总计 394