跳转到主内容

你所需要的

  1. Canon PowerShot SD1200 IS Function Button Board Replacement, Front and Rear Covers: 步骤 1 中的图像 1,1
    • Remove the battery.

  2. Canon PowerShot SD1200 IS Function Button Board Replacement: 步骤 2 中的图像 1,3 Canon PowerShot SD1200 IS Function Button Board Replacement: 步骤 2 中的图像 2,3 Canon PowerShot SD1200 IS Function Button Board Replacement: 步骤 2 中的图像 3,3
    • Remove the two screws from the side of the camera casing with the strap. (4mm Phillips 00)

    • Remove the two screws from the bottom of the camera. (4mm Phillips 00)

    • Remove the two screws from the right side of the camera opposite the strap. (2mm Phillips 00)

  3. Canon PowerShot SD1200 IS Function Button Board Replacement: 步骤 3 中的图像 1,2 Canon PowerShot SD1200 IS Function Button Board Replacement: 步骤 3 中的图像 2,2
    • Pull off the front cover.

    • If the top of the cover sticks, use gentle downward pressure on the retention clips above the lens to release.

    • Remove the back cover.

  4. Canon PowerShot SD1200 IS Function Button Board Replacement, Function Buttons: 步骤 4 中的图像 1,1
    • Use the spudger to lift the tab on the Zero Insertion Force (ZIF) connector located at the top of the function button board.

    • Be sure you are prying up on the hinged retaining flap, not the connector itself.

    • Slide out the ribbon cable from the connector.

  5. Canon PowerShot SD1200 IS Function Button Board Replacement: 步骤 5 中的图像 1,1
    • Remove the top screw from the function button board. (3.5mm Phillips 00)

    • Remove the bottom screw from the function button board. (2.5mm Phillips 00)

  6. Canon PowerShot SD1200 IS Function Button Board Replacement: 步骤 6 中的图像 1,1
    • Lift out the function button board.

结论

To reassemble your device, follow these instructions in reverse order.

Jeff Casper

于2016年09月15日注册

848 声望

创作了7篇指南

团队

USF Tampa, Team 17-5, Blackwell Fall 2016 USF Tampa, Team 17-5, Blackwell Fall 2016 的会员

USFT-BLACKWELL-F16S17G5

3 名成员

创作了7篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 4

总计 174