修复你的物品 社区 商店

Canon PowerShot SD1000 LCD Screen Replacement

你所需要的

  1. Canon PowerShot SD1000 LCD Screen Replacement, Back Panel: 步骤 1 中的图像 1，2 Canon PowerShot SD1000 LCD Screen Replacement, Back Panel: 步骤 1 中的图像 2，2

    • Remove the two 2.9 mm screws from the side panel closest to the camera lens.

    编辑

  2. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 2 中的图像 1，1

    • Remove the two 2.9 mm screws from the camera bottom panel.

    编辑

  3. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 3 中的图像 1，1

    • Remove the two 2.9 mm screws from the side panel farthest from the lens.

    编辑

  4. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 4 中的图像 1，1

    • Pull the back panel away from the camera body, starting at the end with the function buttons.

    编辑

  6. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 5 中的图像 1，1

    • Remove the small cover panel and the attached wrist strap mount.

    编辑

  7. Canon PowerShot SD1000 LCD Screen Replacement, Front Case: 步骤 6 中的图像 1，1

    • Remove the front cover by gently pulling it away from the camera body.

    编辑

  8. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 7 中的图像 1，1

    • Place the front cover, back cover, and wrist strap mount in a safe place until you are ready for reassembly.

    编辑

  9. Canon PowerShot SD1000 LCD Screen Replacement, LCD Screen: 步骤 8 中的图像 1，1

    • Remove the two 2.4 mm screws located at the top of the LCD panel.

    编辑

  10. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 9 中的图像 1，2 Canon PowerShot SD1000 LCD Screen Replacement: 步骤 9 中的图像 2，2

    • Pull up the metal frame surrounding the LCD screen starting at the side of the camera.

    编辑

  11. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 10 中的图像 1，1

    • Push the metal frame away from the metal tab using the spudger to detach the frame.

    • Rotate the metal frame upwards.

    • The metal framing should be attached by a metal tab towards the bottom of the camera, near the function buttons.

    编辑

  12. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 11 中的图像 1，2 Canon PowerShot SD1000 LCD Screen Replacement: 步骤 11 中的图像 2，2

    • Carefully lift the metal frame from the camera.

    • Remove the black LCD screen, leaving the thin lens pieces in place.

    • BE CAREFUL; both components are attached by an orange connector ribbon and cannot be removed yet.

    编辑

  13. Canon PowerShot SD1000 LCD Screen Replacement: 步骤 12 中的图像 1，3 Canon PowerShot SD1000 LCD Screen Replacement: 步骤 12 中的图像 2，3 Canon PowerShot SD1000 LCD Screen Replacement: 步骤 12 中的图像 3，3
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Carefully pull on the orange connector ribbon to disconnect the LCD screen.

    • The LCD screen can be pulled out of the frame before disconnecting its connector ribbon.

    • Tweezers are helpful to disconnect the ribbon.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与8其他贡献者

Phillip Phung

于01/19/12注册

666 声望

创作了9篇指南

徽章: 13

+ 10更多徽章

团队

Cal Poly, Team 8-18, Maness Winter 2012 Cal Poly, Team 8-18, Maness Winter 2012 的会员

CPSU-MANESS-W12S8G18

4 名成员

创作了12篇指南

1指南评论

Very helpful. These units still sell for a lot more than the cost of the replacement LCD

George Francis - 回复

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 12

过去 30 天： 54

总计 4,447