简介

This guide demonstrates how to remove and replace the battery pack.

Turn the camera with the bottom side facing up.
  • Turn the camera with the bottom side facing up.

  • Locate the panel labeled "Batt. Open"

  • Place your finger on the panel and slide it in the direction of the arrow.

  • The slot will swing open revealing the battery pack.

添加评论

Rotate the camera so that the slot is horizontal.
  • Rotate the camera so that the slot is horizontal.

  • Pull the orange lever and the battery will spring out slightly.

添加评论

  • Grasp battery and fully pull out of slot

  • When placing the new battery back in the slot, the arrow on the battery must align with the arrow on the camera.

添加评论

结论

After a new battery has been inserted, close the swinging door and you're done.

Randy Lormand

于2011年01月23日注册

331 信誉积分

创作了3篇指南

团队

Cal Poly, Team 11-27, Maness Winter 2011 Cal Poly, Team 11-27, Maness Winter 2011 的会员

CPSU-MANESS-W11S11G27

4 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 1,346