跳转到主内容

简介

Replacing the Canon-PowerShot G12 HDMI port is a highly-invasive step-intensive process that becomes necessary if the HDMI port sustains damage due to a crack, water, or jams, or if the HDMI port no longer functions properly.

In this guide, you will learn how to replace the HDMI port carefully without damaging any essential internal components.

  1. Open the back cover of the camera, see steps 1-6 in Canon PowerShot G12 Rear Function Setting Dial Replacement
  2. On the right side of the camera looking from the back, locate the HDMI port and use a spudger to remove it.
    • On the right side of the camera looking from the back, locate the HDMI port and use a spudger to remove it.

  3. Insert the new HDMI port until you hear a click on both sides, ensuring the holes match up with the ports on the camera.
    • Insert the new HDMI port until you hear a click on both sides, ensuring the holes match up with the ports on the camera.

结论

To reassemble your device, follow these instructions in reverse order.

Nathan Meuwissen

于2015年02月23日注册

517 信誉积分

创作了3篇指南

团队

USF Tampa, Team 1-5, Leahy Winter 2015 USF Tampa, Team 1-5, Leahy Winter 2015 的会员

USFT-LEAHY-W15S1G5

3 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 9

总计 1,604