修复你的物品 社区 商店

Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement

简介

If you’re experiencing problems with your camera turning on or the camera taking photos, consider replacing the power/shutter button panel in your camera. This guide will show you how to replace your damaged power button.

你所需要的

  1. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement, Power/Shutter Button Panel: 步骤 1 中的图像 1，2 Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement, Power/Shutter Button Panel: 步骤 1 中的图像 2，2

    • On the top-center of your device, turn off the camera by pressing the power button.

    • Put your finger on the battery door and slide the battery door to the right to open it.

    • Push the release button downward and it will release the battery.

    编辑

  2. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: 步骤 2 中的图像 1，1

    • Use the Phillips #00 screwdriver to remove the screws.

    编辑

  3. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: 步骤 3 中的图像 1，1

    • Remove the two 4.0mm screws on the bottom of the camera located near the battery door using a Phillips #00 screwdriver.

    编辑

  5. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: 步骤 4 中的图像 1，1

    • At the bottom of the camera next to the battery door, remove two more screws using the Phillips #00 screwdriver.

    编辑

  6. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: 步骤 5 中的图像 1，1

    • To remove the back portion of the camera case, use your fingers to carefully pry the case apart at the seam.

    编辑

  7. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: 步骤 6 中的图像 1，2 Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: 步骤 6 中的图像 2，2

    • On the motherboard there should be a white port. Using the spudger, disconnect it from the motherboard.

    编辑

  8. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: 步骤 7 中的图像 1，1

    • Follow the green and white wire. There is a gray piece of rubber holding the button into place. Remove it with the spudger.

    编辑

  9. Canon PowerShot ELPH330 HS Camera Power/Shutter Button Panel Replacement: 步骤 8 中的图像 1，1

    • Lift the panel off from the top of the camera with your hands.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Michelle Ngo

于07/23/19注册

595 声望

创作了3篇指南

徽章: 6

+ 3更多徽章

团队

UW Tacoma, Team S1-G3, Liner Summer 2019 UW Tacoma, Team S1-G3, Liner Summer 2019 的会员

UWT-LINER-SU19S1G3

4 名成员

创作了3篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 4

过去 7 天： 5

过去 30 天： 13

总计 302