简介

Use this guide to replace the Canon PowerShot A75's batteries.

  1. Turn the camera over and locate the "BATT OPEN" sliding switch.
    • Turn the camera over and locate the "BATT OPEN" sliding switch.

  2. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  3. Slide the switch to the right. The battery cover should slide down and spring open. The battery cover should slide down and spring open.
    • Slide the switch to the right.

      • The battery cover should slide down and spring open.

  4. Remove the 4 AA batteries. Watch for the orientation of the batteries as they slide out. The battery orientation is shown under the battery flap itself and on a sticker next to the battery flap.
    • Remove the 4 AA batteries.

      • Watch for the orientation of the batteries as they slide out.

      • The battery orientation is shown under the battery flap itself and on a sticker next to the battery flap.

结论

Put in fresh batteries. Gently shut the flap and slide it forward until you hear a click.

Henry Braden Fisk

于2012年04月16日注册

63 信誉积分

撰写一个指南

团队

Cal Poly, Team 17-30, Amido Spring 2012 Cal Poly, Team 17-30, Amido Spring 2012 的会员

CPSU-AMIDO-S12S17G30

5 名成员

创作了6篇指南

Hi, there is a problem with my Powershot a75. Whenever I switch it on, it just says change the batteries even though they are either new, or fully charged. Thanks

Harry collier - 回复

had same trouble i fix it buy pressing the print button on back next to the disp button it should work then

hot5 - 回复

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 8

总计 682