简介

Take out old, dead batteries. Then replace them with new ones.

Place the camera so the battery cover is facing up, as shown in the picture.
  • Place the camera so the battery cover is facing up, as shown in the picture.

  • Gently push on the outer battery cover until you hear a click, and then release.

添加评论

To open the inner battery cover, push down on the grey latch until you hear a click, and then release.
  • To open the inner battery cover, push down on the grey latch until you hear a click, and then release.

  • Remove the dead batteries from the camera.

添加评论

  • After removing the batteries, insert the new batteries in the proper direction.

  • Now push the black, inner cover down until you hear a click to secure the batteries in place.

  • Push down and forward on the outer cover to secure the latch. Your camera will now be fully charged.

添加评论

结论

Congratulations, you're done.

Ellen Chambers

于2011年01月05日注册

231 信誉积分

创作了2篇指南

团队

Cal Poly, Team 7-37, Regan Winter 2011 Cal Poly, Team 7-37, Regan Winter 2011 的会员

CPSU-REGAN-W11S7G37

4 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 8

总计 1,611