跳转到主内容

Canon ImageCLASS MF4350d Speaker Replacement

你所需要的

  1. Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Front Paneling: 步骤 1 中的图像 1,1
    • Lift the printer lid up as shown in the photo.

  2. Canon ImageCLASS MF4350d Speaker Replacement: 步骤 2 中的图像 1,2 Canon ImageCLASS MF4350d Speaker Replacement: 步骤 2 中的图像 2,2
    • Locate and remove the two 10mm side screws. There is one on each side.

  3. Canon ImageCLASS MF4350d Speaker Replacement: 步骤 3 中的图像 1,2 Canon ImageCLASS MF4350d Speaker Replacement: 步骤 3 中的图像 2,2
    • Unhook the plastic panel from the printer starting from the top.

    • You may need to wiggle the panel a bit to loosen it.

    • To remove the bottom part of the paneling gently lay the printer on its back.

    • The scanner lid needs to be supported when moving the printer

  4. Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: 步骤 4 中的图像 1,3 Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: 步骤 4 中的图像 2,3 Canon ImageCLASS MF4350d Speaker Replacement, Canon ImageCLASS MF4350d Remove Right Side Paneling: 步骤 4 中的图像 3,3
    • Gently unhook the right side paneling (as looking at the printer's front face) from the printer.

    • Use a gentle back and forth motion to wiggle the hooks out.

  5. Canon ImageCLASS MF4350d Speaker Replacement, Speaker: 步骤 5 中的图像 1,1
    • Lay printer on its left side for better access to the speaker.

    • Note: The scanner lid needs to be supported when moving the printer

  6. Canon ImageCLASS MF4350d Speaker Replacement: 步骤 6 中的图像 1,2 Canon ImageCLASS MF4350d Speaker Replacement: 步骤 6 中的图像 2,2
    • Locate the black 7mm screw holding the speaker in place.

    • Using a Phillips head screw driver, unscrew the 7mm screw.

  7. Canon ImageCLASS MF4350d Speaker Replacement: 步骤 7 中的图像 1,3 Canon ImageCLASS MF4350d Speaker Replacement: 步骤 7 中的图像 2,3 Canon ImageCLASS MF4350d Speaker Replacement: 步骤 7 中的图像 3,3
    • Locate the red and black wires connected to the speaker.

    • Undo the white clip holding the wires in place by pinching the tab on the top.

    • Remove the red and black wires from the wire bundle.

    • When replacing the old speaker, do not touch any part of the new speaker that is not metal other than the wires. Doing so could damage the speaker.

    • Lift out the speaker

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Helena Yanez

于09/29/13注册

455 声望

创作了4篇指南

团队

Cal Poly, Team 13-1, Forte Fall 2013 Cal Poly, Team 13-1, Forte Fall 2013 的会员

CPSU-FORTE-F13S13G1

5 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 2

总计 1,347