Canon EOS Rebel G Grip Replacement - iFixit 维修指南

简介

This guide shows you how to install the grip on your camera.

你所需要的

步骤 1 Front Panel

Canon EOS Rebel G Grip Replacement, Front Panel: 步骤 1 中的图像 1，1

Using a #00 Phillips screw driver, remove three 4.4 mm Phillips screws as indicated by the red circles.

步骤 2

Canon EOS Rebel G Grip Replacement: 步骤 2 中的图像 1，2

Canon EOS Rebel G Grip Replacement: 步骤 2 中的图像 2，2

Using your finger, peel back the textured grip so the components are separated.

步骤 3

Canon EOS Rebel G Grip Replacement: 步骤 3 中的图像 1，3

Canon EOS Rebel G Grip Replacement: 步骤 3 中的图像 2，3

Canon EOS Rebel G Grip Replacement: 步骤 3 中的图像 3，3

Using the flat end of a spudger, loosen the connection between the front panel and the device.
Remove the front panel using your hands.

步骤 4 Grip

Canon EOS Rebel G Grip Replacement, Grip: 步骤 4 中的图像 1，1

Using a 00 Phillips screw driver, unscrew the two 4.9 mm Phillips screws. on the inside of the camera.

步骤 5

Canon EOS Rebel G Grip Replacement: 步骤 5 中的图像 1，1

Using a 00 Phillips screw driver, unscrew the two 4.3 mm Phillips screws on the side of the camera.
Use your fingers to pull out the plug that is located between the screw holes.

步骤 6

Canon EOS Rebel G Grip Replacement: 步骤 6 中的图像 1，2

Canon EOS Rebel G Grip Replacement: 步骤 6 中的图像 2，2

Use the flat end of a spudger to pop the grip off and remove grip.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与6其他贡献者

Kyle Reis

于04/02/12注册

52 声望

创作了4篇指南

+ 13更多徽章

团队

Cal Poly, Team 14-9, Forte Spring 2012 Cal Poly, Team 14-9, Forte Spring 2012 的会员

CPSU-FORTE-S12S14G9

5 名成员

创作了36篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 3

总计 1,555