Skip to main content

介绍

This is fairly straight forward, and something you may do in the normal use of your camera. It is even in the manual.

  1. Removing the eyepiece is easy.  There are two methods, you can do it yourself, or put it in your camera bag a dozen times and at least once, it will fall off. Grip the eyepiece by the sides firmly (index finger and thumb).  Wiggle it upwards until it is off.
    • Removing the eyepiece is easy. There are two methods, you can do it yourself, or put it in your camera bag a dozen times and at least once, it will fall off.

    • Grip the eyepiece by the sides firmly (index finger and thumb). Wiggle it upwards until it is off.

  2. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  3. Open the battery door Rotate the door so the one side of the hinge pops out (see photo #2)
    • Open the battery door

    • Rotate the door so the one side of the hinge pops out (see photo #2)

    • Slide other pin out (it pops out the same, but this is easier)

结论

To reassemble your device, follow these instructions in reverse order.

Rubber grips will require adhesive. (I havent gotten this far, I assume rubber cement / double stick tape may work)

4等其他人完成本指南。

Eric D

于2012年11月13日注册

1,116 Reputation

创作了5篇指南

One Comment

But how do you REPLACE the rubber eye piece? Mine seems to be NOT glued, but in a tract of sorts.

Wendell C Durnil - 回复

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 14

All Time: 5,056