菜单

你的设置

Canon EOS 300 Side Panel with Lever Replacement

撰写者： Jordan Tang (和另外3个贡献者)
  • 评论： 0
  • 收藏 0

难度

中等

步骤

5

所需时间

5分钟

节

2

标志

0

简介

This guide removes the side panel of the camera, allowing for repairs on the side lever.

工具

购买这些工具

配件

没有特定配件。

  1. Open up the battery door. Open up the battery door. Open up the battery door.

    • Open up the battery door.

    翻译

  2. Remove the batteries from the camera by sliding them out into your palm. Remove the batteries from the camera by sliding them out into your palm.

    • Remove the batteries from the camera by sliding them out into your palm.

    翻译

  4. Release the side latch to open the back panel. Release the side latch to open the back panel.

    • Release the side latch to open the back panel.

    翻译

  5. Remove the two black 4.5mm screws above and below the latch. Remove the two black 4.5mm screws above and below the latch.

    • Remove the two black 4.5mm screws above and below the latch.

    翻译

  6. Using your finger, carefully pry open the side panel from the top of camera. Pull panel downwards to remove.

    • Using your finger, carefully pry open the side panel from the top of camera.

    • Pull panel downwards to remove.

    • Make sure to keep track of the small black piece of rubber under the latch.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

Jordan Tang

于2014年01月24日注册

534 信誉积分

创作了5篇指南

徽章: 11

+ 8更多徽章

团队

Cal Poly, Team 6-20, Maness Winter 2014 Cal Poly, Team 6-20, Maness Winter 2014 的会员

CPSU-MANESS-W14S6G20

4 名成员

创作了11篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 0

总计 257