简介

The bottom panel can be easily removed, and allows access for replacement on other parts of the camera.

配件

无需配件。

  1. Open up the battery door.
    • Open up the battery door.

    添加评论

  2. Remove the batteries from the camera by sliding them out into your palm.
    • Remove the batteries from the camera by sliding them out into your palm.

    添加评论

    • Release the side latch to open the back panel.

    添加评论

    • Remove the two black 4.5mm screws above and below the latch.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using your finger, carefully pry open the side panel from the top of camera.

    • Pull panel downwards to remove.

    • Make sure to keep track of the small black piece of rubber under the latch.

    添加评论

    • Remove the two silver 6mm Phillips #1 screws.

    添加评论

    • Flip camera over to the bottom.

    • Remove the one 5mm Phillips #1 silver screw.

    添加评论

    • Remove the front panel by pulling away from the side with the lever.

    添加评论

    • Remove three black 7.3mm Phillips #1 screws located on the corners of the camera.

    • Remove five black 4.8mm Phillips #1 screws.

    添加评论

    • Simply remove the bottom panel by prying it off with your finger.

    • When removing the panel, be sure the bottom of the camera is facing upright. There are loose gears that may fall out.

    • Be wary of a loose piece of foam attached to the bottom panel.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Tammy Kong

于2014年01月23日注册

643 信誉积分

创作了6篇指南

团队

Cal Poly, Team 6-20, Maness Winter 2014 Cal Poly, Team 6-20, Maness Winter 2014 的会员

CPSU-MANESS-W14S6G20

4 名成员

创作了11篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 322