简介

The three stacked rings in the lens mount ring can be safely and easily removed.

配件

无需配件。

  1. Remove the two 4.8 mm black screws above the lens on the front of the camera.
    • Remove the two 4.8 mm black screws above the lens on the front of the camera.

  2. Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.
    • Remove the 4.3 mm black screw under the lens ring, and the 4.8 mm black screw under the camera.

  3. Remove the 4.8 mm black screw on the left side of the camera.
    • Remove the 4.8 mm black screw on the left side of the camera.

  4. 所有超过US$100.00或包含 Pro Tech工具包的订单免费送货!

    浏览我们的商店

    善于维修,即天赋异禀。

    与 #ImAGenius 分享您的维修故事

    我们都是天才

    与 #ImAGenius 分享您的维修故事

  5. Remove the front panel by lifting it away from the camera's body.
    • Remove the front panel by lifting it away from the camera's body.

  6. Remove four 7.1 mm silver screws from lens mount ring.
    • Remove four 7.1 mm silver screws from lens mount ring.

  7. Remove outer mount ring.
    • Remove outer mount ring.

    • The silver button may detach.

  8. Remove thin gold ring.
    • Remove thin gold ring.

    • Correct orientation is pictured.

  9. Remove thin silver ring.
    • Remove thin silver ring.

    • Correct orientation is pictured.

  10. All rings are removed.
    • All rings are removed.

    • Follow pictures in reverse order to replace rings.

结论

To reassemble your device, follow these instructions in reverse order.

Antonia

于2011年04月17日注册

109 信誉积分

创作了2篇指南

团队

Cal Poly, Team 8-8, Regan Spring 2011 Cal Poly, Team 8-8, Regan Spring 2011 的会员

CPSU-REGAN-S11S8G8

5 名成员

创作了11篇指南

浏览统计数据:

过去的24小时: 0

过去的7天: 5

过去的30天: 28

总计 4,222