Canon ELPH Z3 Camera Image Sensor Replacement

最后更新于 February 19, 2020

15 - 20 分钟

困难

简介

An image sensor is a key component in a camera's function. The imaging sensor senses and converys information that creates an image. It converts the variable flux of light waves into the signals that carry this information. The main issue that can occur with an imaging sensor is dust build up. This guide provides step by step instructions to replace your imaging sensor in your Canon ELPH Z3.

你所需要的

工具

当你通过这些链接购买商品时，iFixit 会赚取佣金。

步骤 1 Shutter Button

Canon ELPH Z3 Camera Image Sensor Replacement, Shutter Button: 步骤 1 中的图像 1，3

Canon ELPH Z3 Camera Image Sensor Replacement, Shutter Button: 步骤 1 中的图像 2，3

Canon ELPH Z3 Camera Image Sensor Replacement, Shutter Button: 步骤 1 中的图像 3，3

Unscrew the 7 4.1mm screws around the camera using a PH000 screwdriver.

编辑

步骤 2

Canon ELPH Z3 Camera Image Sensor Replacement: 步骤 2 中的图像 3，3

Split the front and back coverings of the camera.
Remove the back covering completely.
This allows for easier access to the shutter button carrier.

编辑

步骤 3

Slide the shutter button carrier off of the camera.
Notice shutter button is on the right hand side of the carrier.

编辑

步骤 4

Canon ELPH Z3 Camera Image Sensor Replacement: 步骤 4 中的图像 3，3

Press upward on the shutter button from the underside of the carrier by using your thumb.
Separate the shutter button from the carrier.

编辑

步骤 5 Rear Screen

Canon ELPH Z3 Camera Image Sensor Replacement, Rear Screen: 步骤 5 中的图像 1，2

Canon ELPH Z3 Camera Image Sensor Replacement, Rear Screen: 步骤 5 中的图像 2，2

Pull apart the front and back coverings of the camera.
Remove the back covering completely to gain access of the rear screen.

编辑

步骤 6

Canon ELPH Z3 Camera Image Sensor Replacement: 步骤 6 中的图像 3，3

Unscrew the 6 4.1mm screws that are holding the back screen in place by using the PH000 screwdriver.
This step may require for you to pull back tape to gain access to some screws.

编辑