简介

This guide will teach you how to replace ink cartridges for the Bubblejet i80.

Remove the two screws on the back of the cartridge.
  • Remove the two screws on the back of the cartridge.

添加评论

With a sliding motion remove the black plastic pieces. With a sliding motion remove the black plastic pieces.
  • With a sliding motion remove the black plastic pieces.

添加评论

With force pull apart the casing. With force pull apart the casing. With force pull apart the casing.
  • With force pull apart the casing.

添加评论

Push the cartridge in and then pull the cartridge up to remove it. Push the cartridge in and then pull the cartridge up to remove it.
  • Push the cartridge in and then pull the cartridge up to remove it.

添加评论

Place the black cartridge into the top slot and then push down to click into place. Place the colored cartridge into the bottom slot and then push down to click into place.
  • Place the black cartridge into the top slot and then push down to click into place.

  • Place the colored cartridge into the bottom slot and then push down to click into place.

添加评论

Complete steps 1-3 in reverse order to close the lid.
  • Complete steps 1-3 in reverse order to close the lid.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Andrew

于2011年10月14日注册

15 信誉积分

撰写一个指南

团队

James Madison, Team 2-3, Allen Fall 2011 James Madison, Team 2-3, Allen Fall 2011 的会员

JMU-ALLEN-F11S2G3

2 名成员

创作了1篇指南

Why go through all this hassle? Just turn on the printer and open the black smoke color door, the cartridge should return to center position where you have to just press the tab on the left side of each ink cartridge, tip the cartridge up and snap the new one in. takes less than 1 minute.

The printer is a great little work horse and really gets the job done!

filmwrk - 回复

Yes, my sentiments exactly! As I was reading these directions I was wondering what non-tech person did not even try lifting up the black lid to replace the cartridges? This is easy. Geez, a person could break their printer following the above directions with the screwdriver!!!

Nancy - 回复

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 3,235