Cambridge SoundWorks OontZ Angle Plus Speaker Grill Replacement

简介

Use this guide to replace the damaged or broken speaker cover of your Cambridge SoundWorks OontZ Angle Plus Speaker. The detailed steps will guide you if you are planning to customize your speaker and change the color of the cover. This is a relatively quick and easy replacement process.

你所需要的

步骤 1 Rubber Casing

Cambridge SoundWorks OontZ Angle Plus Speaker Grill Replacement, Rubber Casing: 步骤 1 中的图像 1，1

Remove the six screw covers from the bottom of the device.

编辑

步骤 2

Starting from the screw covers, remove the front and back casing of the device.

编辑

步骤 3

Carefully pull off the casing covering the ends.

编辑

步骤 4

Slowly remove the casing from the top of the device.

编辑

步骤 5 Speaker Grill

Cambridge SoundWorks OontZ Angle Plus Speaker Grill Replacement, Speaker Grill: 步骤 5 中的图像 1，1

Unscrew the five 11.5mm Phillips screws from the bottom plate.

编辑

步骤 6

Carefully pull apart the bottom and top plates, using the blue plastic opening tool.

编辑

步骤 7

Once the plates are separated, slowly pull the bottom plate away from the top plate.
There are wires connected to both plates, so be cautious while doing this step.

编辑

步骤 8

Use the metal spudger to bend the three bendable clamps on the ends of the speaker cover.
Beware, the bending process requires patience and extra time.

编辑