修复你的物品 社区 商店
加入维修社区 - 创建账户

Bush Pump Riser Main Slider Replacement

简介

Follow this guide to remove the riser main slider in order to repair or replace it.

你所需要的

  1. Bush Pump Riser Main Slider Replacement, Head and Handle: 步骤 1 中的图像 1，2 Bush Pump Riser Main Slider Replacement, Head and Handle: 步骤 1 中的图像 2，2

    • Test pump performance by pumping 40 strokes.

    • An effective pump should return at least 10 liters.

    翻译

  2. Bush Pump Riser Main Slider Replacement: 步骤 2 中的图像 1，2 Bush Pump Riser Main Slider Replacement: 步骤 2 中的图像 2，2

    • Remove the two pins connecting the handle to the slider.

    翻译

  3. Bush Pump Riser Main Slider Replacement: 步骤 3 中的图像 1，2 Bush Pump Riser Main Slider Replacement: 步骤 3 中的图像 2，2

    • Pull the two lever arms away from the slider.

    翻译

  4. Bush Pump Riser Main Slider Replacement: 步骤 4 中的图像 1，2 Bush Pump Riser Main Slider Replacement: 步骤 4 中的图像 2，2

    • Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.

    翻译

  6. Bush Pump Riser Main Slider Replacement: 步骤 5 中的图像 1，3 Bush Pump Riser Main Slider Replacement: 步骤 5 中的图像 2，3 Bush Pump Riser Main Slider Replacement: 步骤 5 中的图像 3，3

    • Throughout this step, make sure you support the handle and head with at least three hands.

    • Slide the bearing rod out of the head.

    • Inspect the bearing rod and head for any wear or tear.

    翻译

  7. Bush Pump Riser Main Slider Replacement: 步骤 6 中的图像 1，1

    • Remove the head and handle, and place them on a clean surface to prevent contamination.

    翻译

  8. Bush Pump Riser Main Slider Replacement, Riser Main Slider: 步骤 7 中的图像 1，2 Bush Pump Riser Main Slider Replacement, Riser Main Slider: 步骤 7 中的图像 2，2

    • Firmly lift the riser main slider with two hands.

    • Use caution not to drop the riser main, as this can damage the pump cylinder.

    翻译

  9. Bush Pump Riser Main Slider Replacement: 步骤 8 中的图像 1，3 Bush Pump Riser Main Slider Replacement: 步骤 8 中的图像 2，3 Bush Pump Riser Main Slider Replacement: 步骤 8 中的图像 3，3

    • Use a pipe wrench to fully loosen the above grade riser pipe.

    翻译

  10. Bush Pump Riser Main Slider Replacement: 步骤 9 中的图像 1，3 Bush Pump Riser Main Slider Replacement: 步骤 9 中的图像 2，3 Bush Pump Riser Main Slider Replacement: 步骤 9 中的图像 3，3

    • Lift the slider and riser main pipe.

    • Place a pump rod clamp around the rod, and tighten it securely against the pump rod.

    • Carefully lower the riser main and slider to allow it to rest on the rod clamp.

    翻译

  11. Bush Pump Riser Main Slider Replacement: 步骤 10 中的图像 1，3 Bush Pump Riser Main Slider Replacement: 步骤 10 中的图像 2，3 Bush Pump Riser Main Slider Replacement: 步骤 10 中的图像 3，3

    • Loosen and remove both the pump rod jam nut and pump rod nut on the top of the slider.

    翻译

  12. Bush Pump Riser Main Slider Replacement: 步骤 11 中的图像 1，2 Bush Pump Riser Main Slider Replacement: 步骤 11 中的图像 2，2

    • Remove the riser main slider, and inspect it for wear and tear.

    • Set the slider in a sanitary place to prevent contamination.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Jake Devincenzi

于04/18/11注册

118,915 声望

创作了57篇指南

徽章: 51

+ 48更多徽章

0指南评论

添加评论

浏览统计数据:

过去 24 小时： 5

过去 7 天： 13

过去 30 天： 25

总计 285