跳转到主内容

Bush Pump Head and Handle Replacement

  1. Bush Pump Head and Handle Replacement, Head and Handle: 步骤 1 中的图像 1,2 Bush Pump Head and Handle Replacement, Head and Handle: 步骤 1 中的图像 2,2
    • Test pump performance by pumping 40 strokes.

    • An effective pump should return at least 10 liters.

  2. Bush Pump Head and Handle Replacement: 步骤 2 中的图像 1,2 Bush Pump Head and Handle Replacement: 步骤 2 中的图像 2,2
    • Remove the two pins connecting the handle to the slider.

  3. Bush Pump Head and Handle Replacement: 步骤 3 中的图像 1,2 Bush Pump Head and Handle Replacement: 步骤 3 中的图像 2,2
    • Pull the two lever arms away from the slider.

  4. Bush Pump Head and Handle Replacement: 步骤 4 中的图像 1,2 Bush Pump Head and Handle Replacement: 步骤 4 中的图像 2,2
    • Lift the two pins attaching the pump frame to the head and handle up, off of the pump frame.

  5. Bush Pump Head and Handle Replacement: 步骤 5 中的图像 1,3 Bush Pump Head and Handle Replacement: 步骤 5 中的图像 2,3 Bush Pump Head and Handle Replacement: 步骤 5 中的图像 3,3
    • Throughout this step, make sure you support the handle and head with at least three hands.

    • Slide the bearing rod out of the head.

    • Inspect the bearing rod and head for any wear or tear.

  6. Bush Pump Head and Handle Replacement: 步骤 6 中的图像 1,1
    • Remove the head and handle, and place them on a clean surface to prevent contamination.

结论

To reassemble your device, follow these instructions in reverse order.

Jake Devincenzi

于04/18/11注册

117,225 声望

创作了57篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 1

总计 163