Brother XR-40 Stitch Select Knob Replacement

简介

In order to switch the stitching styles of your sewing machine, the stitch select knob must be properly functioning. This guide will show the steps for replacement.

你所需要的

步骤 1 Back Panel

Brother XR-40 Stitch Select Knob Replacement, Back Panel: 步骤 1 中的图像 1，1

Place the machine on a solid surface.
Remove the 14mm Phillips #2 screw holding on the face cover.

编辑

步骤 2

Remove the two 14mm Phillips #2 screws and two 22mm Phillips #2 screws that secure the rear casing.

编辑

步骤 3

Lay the machine on its side.
Remove the four 10mm Phillips #2 screws that hold the bottom panel in place.
The feet will come off with the screws.

编辑

步骤 4

Remove the bottom panel.

编辑

步骤 5

Place the machine upright.
Remove the rear casing.
You may have to wiggle the panel and pull at the same time.

编辑

步骤 6 Stitch Select Knob

Brother XR-40 Stitch Select Knob Replacement, Stitch Select Knob: 步骤 6 中的图像 1，1

Adjust the knob to gain access to the phillips head screw.

编辑

步骤 7

Remove the 14mm Phillips #2 screw.

编辑

步骤 8

Remove the knob.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与1其他贡献者

Kevin Bickers

于02/05/14注册

673 声望

创作了4篇指南

徽章: 12

+ 9更多徽章

团队

Cal Poly, Team 2-12, Amido Winter 2014 Cal Poly, Team 2-12, Amido Winter 2014 的会员

CPSU-AMIDO-W14S2G12

4 名成员

创作了12篇指南

Brother XR-40 Stitch Select Knob Replacement

简介

你所需要的

步骤 1 Back Panel

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6 Stitch Select Knob

添加评论

步骤 7

添加评论

步骤 8

添加评论

作者

Kevin Bickers

团队

Cal Poly, Team 2-12, Amido Winter 2014 Cal Poly, Team 2-12, Amido Winter 2014 的会员

0条评论

添加评论

嵌入本指南

预览