简介

Damaged presserfoot? It is easy to replace and this guide will take you through the necessary steps.

  1. Make sure the presser foot is in the up position.
    • Make sure the presser foot is in the up position.

    • The switch should be up, not in the vertical position.

    添加评论

  2. Adjust the needle to the top of its stroke using the hand wheel.
    • Adjust the needle to the top of its stroke using the hand wheel.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Lift the arm on the back of the presser foot assembly to release the foot.

    添加评论

    • Remove the presser foot.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Kevin Bickers

于2014年02月05日注册

601 信誉积分

创作了4篇指南

团队

Cal Poly, Team 2-12, Amido Winter 2014 Cal Poly, Team 2-12, Amido Winter 2014 的会员

CPSU-AMIDO-W14S2G12

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 4

过去的30天: 12

总计 844