简介

Replacing the water valve should it fail to work.

Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver.
  • Remove the two 12mm black Phillips screws using a Phillips #0 screwdriver.

  • Reminder for reassembly; This bottom piece is first to be screwed back on.

添加评论

Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.
  • Remove the two 12mm Phillips screws using a Phillips #0 screwdriver.

添加评论

  • Remove the grey plastic casing.

  • Remove the two 12mm hexagonal screws using a 1.5mm hex screwdriver.

添加评论

  • Cut the band connecting the hose to the water valve.

  • Remove the water valve.

  • Reminder for reassembly; You will need a new band to tie the hose back to the water valve.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Antonio

于2012年09月26日注册

73 信誉积分

创作了6篇指南

团队

Cal Poly, Team 1-3, Propen Fall 2012 Cal Poly, Team 1-3, Propen Fall 2012 的会员

CPSU-PROPEN-F12S1G3

4 名成员

创作了6篇指南

Where can I buy a new water valve assembly? Are they custom to the device or generally available ? Thanks!

Betsy Goodrich - 回复

添加评论

浏览统计数据:

过去的24小时: 4

过去的7天: 8

过去的30天: 40

总计 4,356