修复你的物品 社区 商店

Braven BRV-HD Charging Port Replacement

简介

Following this guide will show you how to access and replace the charging port. The Braven BRV-HD Battery Replacement is a prerequisite for this guide.

你所需要的

  1. Braven BRV-HD Charging Port Replacement, Battery: 步骤 1 中的图像 1，2 Braven BRV-HD Charging Port Replacement, Battery: 步骤 1 中的图像 2，2

    • Placing the device on its back with the BRV-HD logo facing up, remove the eight 5mm hexagon 2.0 screws on the front panel.

    • Make sure the device is turned off before starting.

    翻译

  2. Braven BRV-HD Charging Port Replacement: 步骤 2 中的图像 1，1

    • Lift the front panel off of the speaker using a plastic opening tool.

    翻译

  3. Braven BRV-HD Charging Port Replacement: 步骤 3 中的图像 1，2 Braven BRV-HD Charging Port Replacement: 步骤 3 中的图像 2，2

    • Placing the device with the back panel facing up, remove the eight 5mm hexagon 2.0 screws from the back panel.

    翻译

  4. Braven BRV-HD Charging Port Replacement: 步骤 4 中的图像 1，1

    • Lift the back panel off of the device with a plastic opening tool.

    翻译

  5. Braven BRV-HD Charging Port Replacement: 步骤 5 中的图像 1，2 Braven BRV-HD Charging Port Replacement: 步骤 5 中的图像 2，2

    • Turning the device on its side, unscrew the four 15mm hexagon 2.0 screws on the charging port panel.

    翻译

  7. Braven BRV-HD Charging Port Replacement: 步骤 6 中的图像 1，1

    • Remove the outer rubber flap and the plastic side port panel.

    翻译

  8. Braven BRV-HD Charging Port Replacement: 步骤 7 中的图像 1，2 Braven BRV-HD Charging Port Replacement: 步骤 7 中的图像 2，2

    • Place the device on its front.

    • Loosen the four 12mm Phillips screws in the four corners with a J1 screwdriver.

    • Loosen the two 8mm Phillips screws in the center with a J1 screwdriver.

    • These screws are difficult to reach and will require a screwdriver extension piece.

    翻译

  9. Braven BRV-HD Charging Port Replacement: 步骤 8 中的图像 1，1

    • Pull off the rubber sleeve surrounding the speaker using your hands.

    • There is adhesive binding the sleeve to the speaker and force will be required to remove the sleeve.

    翻译

  10. Braven BRV-HD Charging Port Replacement: 步骤 9 中的图像 1，1

    • Lift the black covering off of the speaker using both hands.

    • Loose screws that you were unable to remove with the screwdriver will be removed when you lift off the black covering.

    翻译

  11. Braven BRV-HD Charging Port Replacement: 步骤 10 中的图像 1，1

    • Remove the four 12mm Phillips screws securing the two battery brackets with a J1 screwdriver.

    • Move any wires aside to have better access to the screws securing the battery.

    翻译

  12. Braven BRV-HD Charging Port Replacement: 步骤 11 中的图像 1，1

    • Remove the two brackets that hold down the battery using your hands.

    翻译

  13. Braven BRV-HD Charging Port Replacement: 步骤 12 中的图像 1，2 Braven BRV-HD Charging Port Replacement: 步骤 12 中的图像 2，2

    • Use the plastic opening tool to lift up the battery.

    • Remove the battery using your hands.

    • The wires connecting the battery to the motherboard are still plugged in. Avoid pulling on the battery or these wires may break.

    翻译

  14. Braven BRV-HD Charging Port Replacement: 步骤 13 中的图像 1，1
    在这个步骤中使用的工具：
    Tweezers
    $4.99
    购买

    • Disconnect the wire attaching the battery to the motherboard.

    • There is green glue on the wire ports preventing the wires from falling out. Peel and remove this glue as necessary.

    • Be careful when pulling out the wires from their ports. The metal stems attached to the ports can break. A spudger or tweezers may help.

    翻译

  15. Braven BRV-HD Charging Port Replacement, Charging Port: 步骤 14 中的图像 1，3 Braven BRV-HD Charging Port Replacement, Charging Port: 步骤 14 中的图像 2，3 Braven BRV-HD Charging Port Replacement, Charging Port: 步骤 14 中的图像 3，3

    • Disconnect the three plugs attached to the plastic charging port panel.

    • Remove and replace the plastic panel with a new one.

    • Be careful in removing the 3 plugs as they can break when being pulled out of their white sockets.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与5其他贡献者

Alex Ku

于09/15/16注册

152 声望

撰写一个指南

徽章: 9

+ 6更多徽章

团队

CSU Fullerton, Team 1-5, Bruce Fall 2016 CSU Fullerton, Team 1-5, Bruce Fall 2016 的会员

CSUF-BRUCE-F16S1G5

5 名成员

创作了5篇指南

3条评论

BRV-HD Bluetooth board parts

michaeadams - 回复

BRV-HD Bluetooth broad parts

michaeadams - 回复

Do you know where to find replacement parts, I need to replace the charging port on my braven HD.

br53ett - 回复

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 24

总计 2,920